On 09/03/2012 06:54 AM, AnilKumar Ch wrote:
> Modify c_can binding documentation according to recent review comments
> on device tree data addition patches.
> 
> Signed-off-by: AnilKumar Ch <[email protected]>
> ---
> Changes from v1:
>       - Separated from "Add DT for AM33XX devices" patch series
>       - Incorporated Stephen Warren's review comments on v1
>         * Removed status and interrupt-parent description from
>           c_can.txt file because these are device specific
>           parameters.
> 
>  .../devicetree/bindings/net/can/c_can.txt          |   24 
> +++++++++++++++-----
>  1 file changed, 18 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt 
> b/Documentation/devicetree/bindings/net/can/c_can.txt
> index a43f083..2c420c2 100644
> --- a/Documentation/devicetree/bindings/net/can/c_can.txt
> +++ b/Documentation/devicetree/bindings/net/can/c_can.txt
> @@ -10,7 +10,6 @@ Required properties:
>                         number
>  
>  Optional properties:
> -- interrupt-parent   : The parent interrupt controller
>  - ti,hwmods          : Must be "d_can<n>" or "c_can<n>", n being the
>                         instance number
>  
> @@ -20,18 +19,31 @@ Future plan is to migrate hwmod data base contents into 
> device tree
>  blob so that, all the required data will be used from device tree dts
>  file.
>  
> -Examples:
> +Example:
>  
> -     d_can@481D0000 {
> +Step1: SoC common .dtsi file
> +
> +     d_can1: d_can@481d0000 {
>               compatible = "bosch,d_can";
> -             reg = <0x481D0000 0x1000>;
> -             interrupts = <55 0x4>;
> +             reg = <0x481d0000 0x2000>;
> +             interrupts = <55>;
>               interrupt-parent = <&intc>;
> +             status = "disabled";
>       };
>  
>  (or)
>  
> -     d_can@481D0000 {
> +     d_can1: d_can@481d0000 {
>               compatible = "bosch,d_can";
>               ti,hwmods = "d_can1";
> +             reg = <0x481d0000 0x2000>;
> +             interrupts = <55>;
> +             interrupt-parent = <&intc>;
> +             status = "disabled";
> +     };
> +
> +Step 2: board specific .dts file
> +
> +     &dcan1 {
        ^^^^^^

Is there an alias for dcan1 == d_can1 or is this a typo?

Marc

> +             status = "okay";
>       };
> 


-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

Attachment: signature.asc
Description: OpenPGP digital signature

Reply via email to