When src_maxburst/dst_maxburst is set to 0 by the users of cyclic DMA
(mostly audio) indicates that we should configure the omap DMA to element
sync mode instead of packet mode.
Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
---
drivers/dma/omap-dma.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index ae05618..b77a40d 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -413,7 +413,10 @@ static struct dma_async_tx_descriptor
*omap_dma_prep_dma_cyclic(
d->dev_addr = dev_addr;
d->fi = burst;
d->es = es;
- d->sync_mode = OMAP_DMA_SYNC_PACKET;
+ if (burst)
+ d->sync_mode = OMAP_DMA_SYNC_PACKET;
+ else
+ d->sync_mode = OMAP_DMA_SYNC_ELEMENT;
d->sync_type = sync_type;
d->periph_port = OMAP_DMA_PORT_MPUI;
d->sg[0].addr = buf_addr;
--
1.7.12
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
