On Fri, 5 Oct 2012 09:32:07 +0200, Javier Martinez Canillas wrote: > As Enric said, u-boot has SPL and NAND support for IGEP since > v2012.10-rc1. I just tried kernel a 3.6 with u-boot v2012.10-rc2 and > it works for me.
Ok, I'll try this out. > But I agree that the kernel shouldn't do any assumptions about the > bootloader setting correctly the omap mux. Could you please share your > bootloader that makes the kernel to fail (or your IGEP NAND patches on > top of u-boot U-boot 2011.12) so I can reproduce the issue and try to > fix it? Ok, I'm using the X-Loader from git://git.igep.es/pub/scm/x-loader.git, tag v1.4.4-3, on top of which I apply http://git.free-electrons.com/training-materials/plain/lab-data/sysdev/u-boot/x-loader-1.4.4-3-igep-nand-support.patch to add support for the NAND-based IGEPv2 rev6. In terms of U-Boot, I use U-Boot 2011.12, on top of which I apply http://git.free-electrons.com/training-materials/plain/lab-data/sysdev/u-boot/u-boot-2011.12-igep-nand-support.patch to add support for the NAND-based IGEPv2 rev6. To make things easier if you don't need to rebuild those, I've put online pre-built binaries of X-Loader and U-Boot I'm using: http://free-electrons.com/~thomas/pub/igep-serial-problem/. Thanks, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
