Define the most frequently used bitmasks of the Interrupt Enable /
Interrupt Status register with consistent naming ( with _EN suffix).

Use meaningful concatenation of bitfields for INT_EN_MASK, which shows
which interrupts are enabled by default.
No functional changes.

Signed-off-by: Venkatraman S <svenk...@ti.com>
Acked-by: Felipe Balbi <ba...@ti.com>
---
 drivers/mmc/host/omap_hsmmc.c | 54 +++++++++++++++++++++++++------------------
 1 file changed, 31 insertions(+), 23 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index e91e85a..d16ef0f 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -80,29 +80,17 @@
 #define CLKD_SHIFT             6
 #define DTO_MASK               0x000F0000
 #define DTO_SHIFT              16
-#define INT_EN_MASK            0x307F0033
-#define BWR_ENABLE             (1 << 4)
-#define BRR_ENABLE             (1 << 5)
-#define DTO_ENABLE             (1 << 20)
 #define INIT_STREAM            (1 << 1)
 #define DP_SELECT              (1 << 21)
 #define DDIR                   (1 << 4)
-#define DMA_EN                 0x1
+#define DMAE                   0x1
 #define MSBS                   (1 << 5)
 #define BCE                    (1 << 1)
 #define FOUR_BIT               (1 << 1)
 #define HSPE                   (1 << 2)
 #define DDR                    (1 << 19)
 #define DW8                    (1 << 5)
-#define CC                     0x1
-#define TC                     0x02
 #define OD                     0x1
-#define ERR                    (1 << 15)
-#define CMD_TIMEOUT            (1 << 16)
-#define DATA_TIMEOUT           (1 << 20)
-#define CMD_CRC                        (1 << 17)
-#define DATA_CRC               (1 << 21)
-#define CARD_ERR               (1 << 28)
 #define STAT_CLEAR             0xFFFFFFFF
 #define INIT_STREAM_CMD                0x00000000
 #define DUAL_VOLT_OCR_BIT      7
@@ -111,6 +99,26 @@
 #define SOFTRESET              (1 << 1)
 #define RESETDONE              (1 << 0)
 
+/* Interrupt masks for IE and ISE register */
+#define CC_EN                  (1 << 0)
+#define TC_EN                  (1 << 1)
+#define BWR_EN                 (1 << 4)
+#define BRR_EN                 (1 << 5)
+#define ERR_EN                 (1 << 15)
+#define CTO_EN                 (1 << 16)
+#define CCRC_EN                        (1 << 17)
+#define CEB_EN                 (1 << 18)
+#define CIE_EN                 (1 << 19)
+#define DTO_EN                 (1 << 20)
+#define DCRC_EN                        (1 << 21)
+#define DEB_EN                 (1 << 22)
+#define CERR_EN                        (1 << 28)
+#define BADA_EN                        (1 << 29)
+
+#define INT_EN_MASK            (BADA_EN | CERR_EN | DEB_EN | DCRC_EN |\
+               DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | ERR_EN |\
+               BRR_EN | BWR_EN | TC_EN | CC_EN)
+
 #define MMC_AUTOSUSPEND_DELAY  100
 #define MMC_TIMEOUT_MS         20
 #define OMAP_MMC_MIN_CLOCK     400000
@@ -458,13 +466,13 @@ static void omap_hsmmc_enable_irq(struct omap_hsmmc_host 
*host,
        unsigned int irq_mask;
 
        if (host->use_dma)
-               irq_mask = INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE);
+               irq_mask = INT_EN_MASK & ~(BRR_EN | BWR_EN);
        else
                irq_mask = INT_EN_MASK;
 
        /* Disable timeout for erases */
        if (cmd->opcode == MMC_ERASE)
-               irq_mask &= ~DTO_ENABLE;
+               irq_mask &= ~DTO_EN;
 
        OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
        OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
@@ -702,8 +710,8 @@ static void send_init_stream(struct omap_hsmmc_host *host)
        OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
 
        timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
-       while ((reg != CC) && time_before(jiffies, timeout))
-               reg = OMAP_HSMMC_READ(host->base, STAT) & CC;
+       while ((reg != CC_EN) && time_before(jiffies, timeout))
+               reg = OMAP_HSMMC_READ(host->base, STAT) & CC_EN;
 
        OMAP_HSMMC_WRITE(host->base, CON,
                OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
@@ -794,7 +802,7 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, 
struct mmc_command *cmd,
        }
 
        if (host->use_dma)
-               cmdreg |= DMA_EN;
+               cmdreg |= DMAE;
 
        host->req_in_progress = 1;
 
@@ -1014,11 +1022,11 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host 
*host, int status)
        data = host->data;
        dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
 
-       if (status & ERR) {
+       if (status & ERR_EN) {
                omap_hsmmc_dbg_report_irq(host, status);
-               if (status & (CMD_TIMEOUT | DATA_TIMEOUT))
+               if (status & (CTO_EN | DTO_EN))
                        hsmmc_command_incomplete(host, -ETIMEDOUT);
-               else if (status & (CMD_CRC | DATA_CRC))
+               else if (status & (CCRC_EN | DCRC_EN))
                        hsmmc_command_incomplete(host, -EILSEQ);
 
                if (host->cmd)
@@ -1029,9 +1037,9 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host 
*host, int status)
                }
        }
 
-       if (end_cmd || ((status & CC) && host->cmd))
+       if (end_cmd || ((status & CC_EN) && host->cmd))
                omap_hsmmc_cmd_done(host, host->cmd);
-       if ((end_trans || (status & TC)) && host->mrq)
+       if ((end_trans || (status & TC_EN)) && host->mrq)
                omap_hsmmc_xfer_done(host, data);
 }
 
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to