On Tue, Nov 06, 2012 at 11:15:34, Bedia, Vaibhav wrote:
> On Mon, Nov 05, 2012 at 15:12:27, AnilKumar, Chimata wrote:
> [...]
> >
> > +#define SHUTDOWN_TIME_SEC 2
> > +#define SECS_IN_MIN 60
> > +#define WAIT_AFTER (SECS_IN_MIN - SHUTDOWN_TIME_SEC)
> > +#define WAIT_TIME_MS (SHUTDOWN_TIME_SEC * 1000)
> > +
> > static void __iomem *rtc_base;
> >
> [...]
> > +
> > + /* Wait few seconds instead of rollover */
> > + do {
> > + omap_rtc_read_time(NULL, &tm);
> > + if (WAIT_AFTER <= tm.tm_sec)
> > + mdelay(WAIT_TIME_MS);
> > + } while (WAIT_AFTER <= tm.tm_sec);
>
> This hardcoded wait for rollover doesn't look good. I see some
> helper functions in rtc-lib.c which probably could be used for
> converting the current time to elapsed seconds, add the delay and
> then convert it back to the time to be programmed in RTC without
> worrying about rollover. Why not use that?
I am not aware of those APIs, can you point some?
>
> > +
> > + /* Add shutdown time to the current value */
> > + tm.tm_sec += SHUTDOWN_TIME_SEC;
> > +
> > + if (tm2bcd(&tm) < 0)
> > + return;
> > +
> > + pr_info("System will go to power_off state in approx. %d secs\n",
> > + SHUTDOWN_TIME_SEC);
> > +
> > + /* Set the ALARM2 time */
> > + rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG);
> > + rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG);
> > + rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG);
> > + rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG);
> > + rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG);
> > + rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG);
> > +
> > + /* Enable alarm2 interrupt */
> > + val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG);
> > + writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2,
> > + rtc_base + OMAP_RTC_INTERRUPTS_REG);
> > +
>
> These registers are not present in older versions of the IP so how
> does that get handled?
I think, earlier this feature is not supported/not used.
>
> You also need to describe the connection between the ALARM2 and the
> power off logic in detail.
Sure, I will add.
Thanks
AnilKumar
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
