> Boot tests:
>
> * AM335x Beaglebone: omap2plus_defconfig kernels don't boot
> - May be fixed now, pending retest:
> - http://marc.info/?l=linux-omap&m=135082257727502&w=2
> - Not yet part of the automated test suite
> * May be due to an old U-boot with FDT support problems used here?
> Pending local investigation and re-test
I'm also trying to boot 3.7-rc5, but my board has console on ttyO3. So I took
arch/arm/boot/dts/am335x-evm.dts and replaced uart definition to
uart4: serial@481a6000 {
status = "okay";
};
is it sufficient?
In u-boot
commit 59852d03867108217fe88e3bfc3e1e9cedfe63c5
Merge: 22b6fcb b3e5cd1
Author: Tom Rini <[email protected]>
Date: Fri Nov 9 08:47:25 2012 -0700
Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze
I use following commands and get following output:
U-Boot# mmc rescan ; fatload mmc 0 82000000 uImage;fatload mmc 0 80000000
am335x-evm.dtb
reading uImage
4222584 bytes read
reading am335x-evm.dtb
5172 bytes read
U-Boot# fdt addr 80000000; fdt resize; bootm 82000000 - 80000000
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-3.7.0-rc5-00028-g79e979e
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4222520 Bytes = 4 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 80000000
Booting using the fdt blob at 0x80000000
Loading Kernel Image ... OK
OK
reserving fdt memory region: addr=80000000 size=2000
Loading Device Tree to 8fe64000, end 8fe68fff ... OK
Starting kernel ...
I force kernel to use default params, so I don't specify them in u-boot. Any
idea?
Best regards,
Yegor
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
