Hello,
Interesting, but Beaglebone powers off on the boot in case when the board is
powered only via USB and ethernet cable is connected. It looks like PMIC turns
off all voltages on the board - even Power LED doesn't light and USB device
disappears from the host. The described situation doesn't show with an external
PSU or without ethernet cable.
I don't think that is a hardware problem because the board boots fine with a
kernel/userland config from original supplied TF card.
I use the current git kernel with DTS and omap2plus_defconfig.
Regards,
Igor.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
