Hello Tomi,
On 11/19/2012 06:52 AM, Tomi Valkeinen wrote:
On 2012-11-18 18:28, Thomas Weber wrote:
Add i2c bus number for DVI output.
The driver uses this to detect if a panel is connected and to read EDID.
Signed-off-by: Thomas Weber <[email protected]>
Cc: [email protected] #v3.5 v3.6
---
arch/arm/mach-omap2/board-devkit8000.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c
b/arch/arm/mach-omap2/board-devkit8000.c
index 1fd161e..73d3d8e 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -138,6 +138,7 @@ static struct omap_dss_device devkit8000_lcd_device = {
};
static struct tfp410_platform_data dvi_panel = {
+ .i2c_bus_num = 1,
.power_down_gpio = -1,
};
That change is already included in the "[PATCH] OMAP: board-files: fix
i2c_bus for tfp410" path I sent on Friday.
Tomi
Thanks.
Thomas
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
