The OMAP3xxx CPUIdle driver contains some code to place a lower bound on the PER powerdomain's power state. Convert this code to a data-driven implementation to remove branches and to improve readability.
Signed-off-by: Paul Walmsley <[email protected]> Cc: Kevin Hilman <[email protected]> --- arch/arm/mach-omap2/cpuidle34xx.c | 44 +++++++++++++++++++------------------ 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index bca7a88..0067467 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -36,38 +36,51 @@ /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { - u32 mpu_state; - u32 core_state; + u8 mpu_state; + u8 core_state; + u8 per_min_state; }; +/* + * Prevent PER OFF if CORE is not in RETention or OFF as this would + * disable PER wakeups completely. + */ static struct omap3_idle_statedata omap3_idle_data[] = { { .mpu_state = PWRDM_POWER_ON, .core_state = PWRDM_POWER_ON, + /* In C1 do not allow PER state lower than CORE state */ + .per_min_state = PWRDM_POWER_ON, }, { .mpu_state = PWRDM_POWER_ON, .core_state = PWRDM_POWER_ON, + .per_min_state = PWRDM_POWER_RET, }, { .mpu_state = PWRDM_POWER_RET, .core_state = PWRDM_POWER_ON, + .per_min_state = PWRDM_POWER_RET, }, { .mpu_state = PWRDM_POWER_OFF, .core_state = PWRDM_POWER_ON, + .per_min_state = PWRDM_POWER_RET, }, { .mpu_state = PWRDM_POWER_RET, .core_state = PWRDM_POWER_RET, + .per_min_state = PWRDM_POWER_OFF, }, { .mpu_state = PWRDM_POWER_OFF, .core_state = PWRDM_POWER_RET, + .per_min_state = PWRDM_POWER_OFF, }, { .mpu_state = PWRDM_POWER_OFF, .core_state = PWRDM_POWER_OFF, + .per_min_state = PWRDM_POWER_OFF, }, }; @@ -207,10 +220,9 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - int new_state_idx; - u32 core_next_state, per_next_state = 0, per_saved_state = 0; + int new_state_idx, ret; + u8 per_next_state, per_saved_state; struct omap3_idle_statedata *cx; - int ret; /* * Use only C1 if CAM is active. @@ -231,25 +243,13 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, /* Program PER state */ cx = &omap3_idle_data[new_state_idx]; - core_next_state = cx->core_state; - per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); - if (new_state_idx == 0) { - /* In C1 do not allow PER state lower than CORE state */ - if (per_next_state < core_next_state) - per_next_state = core_next_state; - } else { - /* - * Prevent PER OFF if CORE is not in RETention or OFF as this - * would disable PER wakeups completely. - */ - if ((per_next_state == PWRDM_POWER_OFF) && - (core_next_state > PWRDM_POWER_RET)) - per_next_state = PWRDM_POWER_RET; - } - /* Are we changing PER target state? */ - if (per_next_state != per_saved_state) + per_next_state = pwrdm_read_next_pwrst(per_pd); + per_saved_state = per_next_state; + if (per_next_state < cx->per_min_state) { + per_next_state = cx->per_min_state; pwrdm_set_next_pwrst(per_pd, per_next_state); + } ret = omap3_enter_idle(dev, drv, new_state_idx); -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
