On 12/05/2012 03:42 PM, Sergei Shtylyov wrote:
> Hello.
>
> On 04-12-2012 18:31, Roger Quadros wrote:
>
>> clk_set_parent is expected to fail on OMAP3 platforms. We don't
>> consider that as fatal so don't spam console.
>
>> Signed-off-by: Roger Quadros <rog...@ti.com>
>> ---
>> drivers/mfd/omap-usb-host.c | 18 +++++++++---------
>> 1 files changed, 9 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
>> index 0bb54393..e5257dc 100644
>> --- a/drivers/mfd/omap-usb-host.c
>> +++ b/drivers/mfd/omap-usb-host.c
>> @@ -657,32 +657,32 @@ static int __devinit usbhs_omap_probe(struct
>> platform_device *pdev)
>> }
>>
>> if (is_ehci_phy_mode(pdata->port_mode[0])) {
>> - /* for OMAP3 , the clk set paretn fails */
>> + /* for OMAP3, clk_set_parent fails */
>> ret = clk_set_parent(omap->utmi_clk[0],
>> omap->xclk60mhsp1_ck);
>> if (ret != 0)
>> - dev_err(dev, "xclk60mhsp1_ck set parent"
>> - "failed error:%d\n", ret);
>> + dev_dbg(dev, "xclk60mhsp1_ck set parent failed : %d\n",
>> + ret);
>> } else if (is_ehci_tll_mode(pdata->port_mode[0])) {
>> ret = clk_set_parent(omap->utmi_clk[0],
>> omap->init_60m_fclk);
>> if (ret != 0)
>> - dev_err(dev, "init_60m_fclk set parent"
>> - "failed error:%d\n", ret);
>> + dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n",
>> + ret);
>> }
>>
>> if (is_ehci_phy_mode(pdata->port_mode[1])) {
>> ret = clk_set_parent(omap->utmi_clk[1],
>> omap->xclk60mhsp2_ck);
>> if (ret != 0)
>> - dev_err(dev, "xclk60mhsp2_ck set parent"
>> - "failed error:%d\n", ret);
>> + dev_dbg(dev, "xclk60mhsp2_ck set parent failed : %d\n",
>> + ret);
>> } else if (is_ehci_tll_mode(pdata->port_mode[1])) {
>> ret = clk_set_parent(omap->utmi_clk[1],
>> omap->init_60m_fclk);
>> if (ret != 0)
>> - dev_err(dev, "init_60m_fclk set parent"
>> - "failed error:%d\n", ret);
>> + dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n",
>> + ret);
>
> Hm, you sometimes put a space before colon in the error message and
> sometimes not. Inconsistent. :-)
>
That was because it fit in 80 characters without the space. I'm not sure
what is more important, fitting in 80 or consistency in the print
message. Maybe i should have removed the spaces everywhere so that it is
consistent as well. :)
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
