On Wed, Dec 12, 2012 at 5:45 AM, Paolo Pisati
<paolo.pis...@canonical.com> wrote:
> Signed-off-by: Paolo Pisati <paolo.pis...@canonical.com>
> ---
> drivers/regulator/core.c | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> index e872c8b..c347fd0 100644
> --- a/drivers/regulator/core.c
> +++ b/drivers/regulator/core.c
> @@ -2250,6 +2250,7 @@ int regulator_set_voltage(struct regulator *regulator,
> int min_uV, int max_uV)
> {
> struct regulator_dev *rdev = regulator->rdev;
> int ret = 0;
> + int old_min_uV, old_max_uV;
>
> mutex_lock(&rdev->mutex);
>
> @@ -2271,18 +2272,29 @@ int regulator_set_voltage(struct regulator
> *regulator, int min_uV, int max_uV)
> ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
> if (ret < 0)
> goto out;
> +
> + /* restore original values in case of error */
> + old_min_uV = regulator->min_uV;
> + old_max_uV = regulator->max_uV;
> regulator->min_uV = min_uV;
> regulator->max_uV = max_uV;
>
> ret = regulator_check_consumers(rdev, &min_uV, &max_uV);
> if (ret < 0)
> - goto out;
> + goto out2;
>
> ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
> -
> + if (ret < 0)
> + goto out2;
> +
> out:
> mutex_unlock(&rdev->mutex);
> return ret;
> +out2:
> + regulator->min_uV = old_min_uV;
> + regulator->max_uV = old_max_uV;
> + mutex_unlock(&rdev->mutex);
> + return ret;
> }
> EXPORT_SYMBOL_GPL(regulator_set_voltage);
>
> --
> 1.7.10.4
Nice! This fixes the 800Mhz lockup on bootup after a software reset we
were seeing on the Beagle xM's with v3.7.x/v3.6.x...
Tested-by: Robert Nelson <robertcnel...@gmail.com>
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
