Add the UART2 muxing data to the board file (this used to be, erroneously, done in the bootloader).
Cc: stable <[email protected]> [3.7] Signed-off-by: Luciano Coelho <[email protected]> --- arch/arm/mach-omap2/board-omap4panda.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 5c8e9ce..769c1fe 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP_PULL_ENA), OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + /* UART2 - BT/FM/GPS shared transport */ + OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
