* Tony Lindgren <[email protected]> [130130 14:09]:
> * Peter Ujfalusi <[email protected]> [130129 00:34]:
> > Hi Tony,
> >
> > On 01/22/2013 11:07 AM, Peter Ujfalusi wrote:
> > > Hi Tony,
> > >
> > > The content of this pull:
> > >
> > > update for audio support via omap-twl4030 and pwm updates in board level:
> > > http://www.spinics.net/lists/linux-omap/msg85085.html
> > >
> > > and zoom-peripherals update to not request the TWL GPIO7:
> > > http://www.spinics.net/lists/linux-omap/msg85187.html
> > >
> > > All is on top of mainline v3.8-rc4 tag.
> >
> > Have you already pulled this one? I can not find the patches in linux-next.
>
> Pulled now thanks. Will push out to omap-for-v3.9/twl.
Looks like this now adds some new section warnings:
WARNING: vmlinux.o(.text+0x34124): Section mismatch in reference from the
function sdp3430_twl_gpio_setup() to the function
.init.text:omap_twl4030_audio_init()
The function sdp3430_twl_gpio_setup() references
the function __init omap_twl4030_audio_init().
This is often because sdp3430_twl_gpio_setup lacks a __init
annotation or the annotation of omap_twl4030_audio_init is wrong.
WARNING: vmlinux.o(.text+0x34b8c): Section mismatch in reference from the
function zoom_twl_gpio_setup() to the function
.init.text:omap_twl4030_audio_init()
The function zoom_twl_gpio_setup() references
the function __init omap_twl4030_audio_init().
This is often because zoom_twl_gpio_setup lacks a __init
annotation or the annotation of omap_twl4030_audio_init is wrong.
These can be fixed with the following patch, but I suspect some
of these cannot be __init/__initdata if the driver reprobes.
Can you please check this? I'll hold on sendinf off
this branch until it's been checked and fixed properly.
Regards,
Tony
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -223,7 +223,7 @@ static struct omap_tw4030_pdata omap_twl4030_audio_data = {
.has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
};
-static int sdp3430_twl_gpio_setup(struct device *dev,
+static int __init sdp3430_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ),
@@ -245,7 +245,7 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
return 0;
}
-static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
+static struct twl4030_gpio_platform_data __initdata sdp3430_gpio_data = {
.pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13)
| BIT(16) | BIT(17),
.setup = sdp3430_twl_gpio_setup,
@@ -374,7 +374,7 @@ static struct regulator_init_data sdp3430_vsim = {
.consumer_supplies = sdp3430_vsim_supplies,
};
-static struct twl4030_platform_data sdp3430_twldata = {
+static struct twl4030_platform_data __initdata sdp3430_twldata = {
/* platform_data for children goes here */
.gpio = &sdp3430_gpio_data,
.keypad = &sdp3430_kp_data,
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -238,7 +238,7 @@ static struct omap_tw4030_pdata omap_twl4030_audio_data = {
.has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
};
-static int zoom_twl_gpio_setup(struct device *dev,
+static int __init zoom_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
@@ -252,11 +252,11 @@ static int zoom_twl_gpio_setup(struct device *dev,
return 0;
}
-static struct twl4030_gpio_platform_data zoom_gpio_data = {
+static struct twl4030_gpio_platform_data __initdata zoom_gpio_data = {
.setup = zoom_twl_gpio_setup,
};
-static struct twl4030_platform_data zoom_twldata = {
+static struct twl4030_platform_data __initdata zoom_twldata = {
/* platform_data for children goes here */
.gpio = &zoom_gpio_data,
.keypad = &zoom_kp_twl4030_data,
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
