If the ethernet driver is not selected, you otherwise get: arch/arm/mach-omap2/board-h4.c:237:12: warning: 'is_gpmc_muxed' defined but not used [-Wunused-function]
I guess it could be argued that the device setup should/could always be done even if the driver isn't enabled, but hopefully the board files will all go away some day so let's stick to the smaller delta. Signed-off-by: Olof Johansson <[email protected]> --- arch/arm/mach-omap2/board-h4.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 812c829..e34541d 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -229,6 +229,8 @@ static u32 get_sysboot_value(void) OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK)); } +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) + /* H4-2420's always used muxed mode, H4-2422's always use non-muxed * * Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423 @@ -246,8 +248,6 @@ static u32 is_gpmc_muxed(void) return 0; } -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) - static struct omap_smc91x_platform_data board_smc91x_data = { .cs = 1, .gpio_irq = 92, -- 1.8.1.192.gc4361b8 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
