The lgphilips panel driver now manages the gpios required to configure the panel. This was previously done in omap_dss_device's platform_enable/disable callbacks defined in board files using this panel.
All the board files using this panel now pass the gpio information as platform data via the panel_generic_dpi_data struct, which is needed by the panel driver to configure the gpios connected to the panel. Hence, the platform_enable/disable ops can be safely removed now. Signed-off-by: Archit Taneja <[email protected]> --- .../omap2/displays/panel-lgphilips-lb035q02.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c index 63cd8857..4ea6548 100644 --- a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c +++ b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c @@ -71,20 +71,13 @@ static int lb035q02_panel_power_on(struct omap_dss_device *dssdev) if (r) goto err0; - if (dssdev->platform_enable) { - r = dssdev->platform_enable(dssdev); - if (r) - goto err1; - } - for (i = 0; i < panel_data->num_gpios; ++i) { gpio_set_value_cansleep(panel_data->gpios[i], panel_data->gpio_invert[i] ? 0 : 1); } return 0; -err1: - omapdss_dpi_display_disable(dssdev); + err0: return r; } @@ -102,9 +95,6 @@ static void lb035q02_panel_power_off(struct omap_dss_device *dssdev) panel_data->gpio_invert[i] ? 1 : 0); } - if (dssdev->platform_disable) - dssdev->platform_disable(dssdev); - omapdss_dpi_display_disable(dssdev); } -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
