With DT support, where naming convention is based on base-addr and not id, so we should follow TRM/Spec numbering label.
This patch changes GPIO numbering as per TRM, as gpio0-3. Matt Porter had submitted base patch sometime back but it didn't make it to the mainline - https://patchwork.kernel.org/patch/1433001/ Later DT nodes for gpio based keypad and led driver got merged, so this fix needs to propagate to board dts files as well. Signed-off-by: Vaibhav Hiremath <hvaib...@ti.com> Signed-off-by: Matt Porter <mpor...@ti.com> Acked-by: Peter Korsgaard <jac...@sunsite.dk> Cc: Benoit Cousson <b-cous...@ti.com> --- arch/arm/boot/dts/am335x-bone.dts | 8 ++++---- arch/arm/boot/dts/am335x-evm.dts | 14 +++++++------- arch/arm/boot/dts/am335x-evmsk.dts | 16 ++++++++-------- arch/arm/boot/dts/am33xx.dtsi | 8 ++++---- 4 files changed, 23 insertions(+), 23 deletions(-) diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index c917efa..860630b 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -69,27 +69,27 @@ led@2 { label = "beaglebone:green:heartbeat"; - gpios = <&gpio2 21 0>; + gpios = <&gpio1 21 0>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led@3 { label = "beaglebone:green:mmc0"; - gpios = <&gpio2 22 0>; + gpios = <&gpio1 22 0>; linux,default-trigger = "mmc0"; default-state = "off"; }; led@4 { label = "beaglebone:green:usr2"; - gpios = <&gpio2 23 0>; + gpios = <&gpio1 23 0>; default-state = "off"; }; led@5 { label = "beaglebone:green:usr3"; - gpios = <&gpio2 24 0>; + gpios = <&gpio1 24 0>; default-state = "off"; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index db52d3c..79b3cc8 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -143,12 +143,12 @@ debounce-delay-ms = <5>; col-scan-delay-us = <2>; - row-gpios = <&gpio2 25 0 /* Bank1, pin25 */ - &gpio2 26 0 /* Bank1, pin26 */ - &gpio2 27 0>; /* Bank1, pin27 */ + row-gpios = <&gpio1 25 0 /* Bank1, pin25 */ + &gpio1 26 0 /* Bank1, pin26 */ + &gpio1 27 0>; /* Bank1, pin27 */ - col-gpios = <&gpio2 21 0 /* Bank1, pin21 */ - &gpio2 22 0>; /* Bank1, pin22 */ + col-gpios = <&gpio1 21 0 /* Bank1, pin21 */ + &gpio1 22 0>; /* Bank1, pin22 */ linux,keymap = <0x0000008b /* MENU */ 0x0100009e /* BACK */ @@ -167,14 +167,14 @@ switch@9 { label = "volume-up"; linux,code = <115>; - gpios = <&gpio1 2 1>; + gpios = <&gpio0 2 1>; /* Bank0, pin2 */ gpio-key,wakeup; }; switch@10 { label = "volume-down"; linux,code = <114>; - gpios = <&gpio1 3 1>; + gpios = <&gpio0 3 1>; /* Bank0, pin3 */ gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 24e915c..15a3052 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -125,26 +125,26 @@ led@1 { label = "evmsk:green:usr0"; - gpios = <&gpio2 4 0>; + gpios = <&gpio1 4 0>; default-state = "off"; }; led@2 { label = "evmsk:green:usr1"; - gpios = <&gpio2 5 0>; + gpios = <&gpio1 5 0>; default-state = "off"; }; led@3 { label = "evmsk:green:mmc0"; - gpios = <&gpio2 6 0>; + gpios = <&gpio1 6 0>; linux,default-trigger = "mmc0"; default-state = "off"; }; led@4 { label = "evmsk:green:heartbeat"; - gpios = <&gpio2 7 0>; + gpios = <&gpio1 7 0>; linux,default-trigger = "heartbeat"; default-state = "off"; }; @@ -158,26 +158,26 @@ switch@1 { label = "button0"; linux,code = <0x100>; - gpios = <&gpio3 3 0>; + gpios = <&gpio2 3 0>; }; switch@2 { label = "button1"; linux,code = <0x101>; - gpios = <&gpio3 2 0>; + gpios = <&gpio2 2 0>; }; switch@3 { label = "button2"; linux,code = <0x102>; - gpios = <&gpio1 30 0>; + gpios = <&gpio0 30 0>; gpio-key,wakeup; }; switch@4 { label = "button3"; linux,code = <0x103>; - gpios = <&gpio3 5 0>; + gpios = <&gpio2 5 0>; }; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index c38b2fa..dd237de 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -87,7 +87,7 @@ reg = <0x48200000 0x1000>; }; - gpio1: gpio@44e07000 { + gpio0: gpio@44e07000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; gpio-controller; @@ -98,7 +98,7 @@ interrupts = <96>; }; - gpio2: gpio@4804c000 { + gpio1: gpio@4804c000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; @@ -109,7 +109,7 @@ interrupts = <98>; }; - gpio3: gpio@481ac000 { + gpio2: gpio@481ac000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; @@ -120,7 +120,7 @@ interrupts = <32>; }; - gpio4: gpio@481ae000 { + gpio3: gpio@481ae000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
