On Tue, 19 Mar 2013 11:35:48 -0500, Jon Hunter <jon-hun...@ti.com> wrote: > Adds a function to read the various GPMC chip-select settings from > device-tree and store them in the gpmc_settings structure. > > Update the GPMC device-tree binding documentation to describe these > options. > > Signed-off-by: Jon Hunter <jon-hun...@ti.com> > Tested-by: Ezequiel Garcia <ezequiel.gar...@free-electrons.com> > --- > Documentation/devicetree/bindings/bus/ti-gpmc.txt | 23 ++++++++++++ > arch/arm/mach-omap2/gpmc.c | 40 > +++++++++++++++++++++ > arch/arm/mach-omap2/gpmc.h | 2 ++ > 3 files changed, 65 insertions(+) > > diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt > b/Documentation/devicetree/bindings/bus/ti-gpmc.txt > index 5ddb2e9..6fde1cf 100644 > --- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt > +++ b/Documentation/devicetree/bindings/bus/ti-gpmc.txt > @@ -65,6 +65,29 @@ The following are only applicable to OMAP3+ and AM335x: > - gpmc,wr-access > - gpmc,wr-data-mux-bus > > +GPMC chip-select settings properties for child nodes. All are optional. > + > +- gpmc,burst-length Page/burst length. Must be 4, 8 or 16. > +- gpmc,burst-wrap Enables wrap bursting > +- gpmc,burst-read Enables read page/burst mode > +- gpmc,burst-write Enables write page/burst mode > +- gpmc,device-nand Device is NAND > +- gpmc,device-width Total width of device(s) connected to a GPMC > + chip-select in bytes. The GPMC supports 8-bit > + and 16-bit devices and so this property must be > + 1 or 2.
I would suggest specifying the actual number of bits. ie. 8 or 16. There is some precidence for that already in DT bindings. > +- gpmc,mux-add-data Address and data multiplexing configuration. > + Valid values are 1 for address-address-data > + multiplexing mode and 2 for address-data > + multiplexing mode. > +- gpmc,sync-read Enables synchronous read. Defaults to asynchronous > + is this is not set. 'if'? > +- gpmc,sync-write Enables synchronous writes. Defaults to asynchronous > + is this is not set. > +- gpmc,wait-pin Wait-pin used by client. Must be less than > + "gpmc,num-waitpins". > +- gpmc,wait-on-read Enables wait monitoring on reads. > +- gpmc,wait-on-write Enables wait monitoring on writes. Otherwise looks okay to me. g. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
