On 04/18/2013 06:10 PM, Jon Hunter wrote:
> On 04/18/2013 04:34 PM, Kevin Hilman wrote:

...

>> Why not just init context right here if bank->loses_context &&
>> !bank->context_valid?

I really like this idea a lot. It can really clean-up the code
and really make it much more readable. Before we were playing 
some tricks with when we init'ed the get_context_loss_count()
function pointer. How about the below?

Tony, care to re-test?

Cheers
Jon

>From d7a940531d354e6be5e16ee50fa8344041df963a Mon Sep 17 00:00:00 2001
From: Jon Hunter <jon-hun...@ti.com>
Date: Mon, 15 Apr 2013 13:06:54 -0500
Subject: [PATCH] gpio/omap: ensure gpio context is initialised

Commit a2797be (gpio/omap: force restore if context loss is not
detectable) broke gpio support for OMAP when booting with device-tree
because a restore of the gpio context being performed without ever
initialising the gpio context. In other words, the context restored was
bad.

This problem could also occur in the non device-tree case, however, it
is much less likely because when booting without device-tree we can
detect context loss via a platform specific API and so context restore
is performed less often.

Nevertheless we should ensure that the gpio context is initialised
on the first pm-runtime resume for gpio banks that could lose their
state regardless of whether we are booting with device-tree or not.

The context loss count was being initialised on the first pm-runtime
suspend following a resume, by populating the get_count_loss_count()
function pointer after the first pm-runtime resume. To make the code
more readable and logical, initialise the context loss count on the
first pm-runtime resume if the context is not yet valid.

Reported-by: Tony Lindgren <t...@atomide.com>
Signed-off-by: Jon Hunter <jon-hun...@ti.com>
---
 drivers/gpio/gpio-omap.c |   45 ++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 42 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0557529..db3c732 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -70,6 +70,7 @@ struct gpio_bank {
        bool is_mpuio;
        bool dbck_flag;
        bool loses_context;
+       bool context_valid;
        int stride;
        u32 width;
        int context_loss_count;
@@ -1129,6 +1130,7 @@ static int omap_gpio_probe(struct platform_device *pdev)
                        bank->loses_context = true;
        } else {
                bank->loses_context = pdata->loses_context;
+               bank->get_context_loss_count = pdata->get_context_loss_count;
        }
 
 
@@ -1179,9 +1181,6 @@ static int omap_gpio_probe(struct platform_device *pdev)
        omap_gpio_chip_init(bank);
        omap_gpio_show_rev(bank);
 
-       if (bank->loses_context)
-               bank->get_context_loss_count = pdata->get_context_loss_count;
-
        pm_runtime_put(bank->dev);
 
        list_add_tail(&bank->node, &omap_gpio_list);
@@ -1260,6 +1259,8 @@ update_gpio_context_count:
        return 0;
 }
 
+static void omap_gpio_init_context(struct gpio_bank *p);
+
 static int omap_gpio_runtime_resume(struct device *dev)
 {
        struct platform_device *pdev = to_platform_device(dev);
@@ -1269,6 +1270,20 @@ static int omap_gpio_runtime_resume(struct device *dev)
        int c;
 
        spin_lock_irqsave(&bank->lock, flags);
+
+       /*
+        * On the first resume during the probe, the context has not
+        * been initialised and so initialise it now. Also initialise
+        * the context loss count.
+        */
+       if (bank->loses_context && !bank->context_valid) {
+               omap_gpio_init_context(bank);
+
+               if (bank->get_context_loss_count)
+                       bank->context_loss_count =
+                               bank->get_context_loss_count(bank->dev);
+       }
+
        _gpio_dbck_enable(bank);
 
        /*
@@ -1385,6 +1400,29 @@ void omap2_gpio_resume_after_idle(void)
 }
 
 #if defined(CONFIG_PM_RUNTIME)
+static void omap_gpio_init_context(struct gpio_bank *p)
+{
+       struct omap_gpio_reg_offs *regs = p->regs;
+       void __iomem *base = p->base;
+
+       p->context.ctrl         = __raw_readl(base + regs->ctrl);
+       p->context.oe           = __raw_readl(base + regs->direction);
+       p->context.wake_en      = __raw_readl(base + regs->wkup_en);
+       p->context.leveldetect0 = __raw_readl(base + regs->leveldetect0);
+       p->context.leveldetect1 = __raw_readl(base + regs->leveldetect1);
+       p->context.risingdetect = __raw_readl(base + regs->risingdetect);
+       p->context.fallingdetect = __raw_readl(base + regs->fallingdetect);
+       p->context.irqenable1   = __raw_readl(base + regs->irqenable);
+       p->context.irqenable2   = __raw_readl(base + regs->irqenable2);
+
+       if (regs->set_dataout && p->regs->clr_dataout)
+               p->context.dataout = __raw_readl(base + regs->set_dataout);
+       else
+               p->context.dataout = __raw_readl(base + regs->dataout);
+
+       p->context_valid = true;
+}
+
 static void omap_gpio_restore_context(struct gpio_bank *bank)
 {
        __raw_writel(bank->context.wake_en,
@@ -1422,6 +1460,7 @@ static void omap_gpio_restore_context(struct gpio_bank 
*bank)
 #else
 #define omap_gpio_runtime_suspend NULL
 #define omap_gpio_runtime_resume NULL
+static void omap_gpio_init_context(struct gpio_bank *p) {}
 #endif
 
 static const struct dev_pm_ops gpio_pm_ops = {
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to