Hi Dan,
On 5/24/2013 8:56 PM, Dan Murphy wrote:
On 05/17/2013 11:17 AM, Dan Murphy wrote:
On 05/17/2013 11:15 AM, Nishanth Menon wrote:
On 11:02-20130517, Dan Murphy wrote:
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
are different.
A1-A3 = gpio_wk7
ES = gpio_110
There is no change to LED D2
Abstract away the pinmux and the LED definitions for the two boards into
the respective DTS files.
Signed-off-by: Dan Murphy <dmur...@ti.com>
---
Changes in this version:
- review comments incorporated.
Previous version of this patch was discussed in:
https://patchwork.kernel.org/patch/2582771/
one minor nit,
$subject could do with space after the ':'
otherwise, it looks fine to me. Will suggest waiting for further
reviewers if they have an opinion prior to a new rev.
Thanks NM I will queue up this change locally and await further review prior to
sending v7.
arch/arm/boot/dts/omap4-panda-common.dtsi | 16 +++++++++++++++-
arch/arm/boot/dts/omap4-panda-es.dts | 28 ++++++++++++++++++++++++++++
2 files changed, 43 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi
b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 03bd60d..5fd59b3 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -16,8 +16,13 @@
reg = <0x80000000 0x40000000>; /* 1 GB */
};
- leds {
+ leds: leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &led_wkgpio_pins
+ >;
+
heartbeat {
label = "pandaboard::status1";
gpios = <&gpio1 7 0>;
@@ -137,6 +142,15 @@
};
};
+&omap4_pmx_wkup {
+ led_wkgpio_pins: pinmux_leds_wkpins {
+ pinctrl-single,pins = <
+ 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */
+ 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */
+ >;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts
b/arch/arm/boot/dts/omap4-panda-es.dts
index f1d8c21..c968a3b 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -34,3 +34,31 @@
0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
>;
};
+
+&omap4_pmx_core {
+ led_gpio_pins: gpio_led_pmx {
+ pinctrl-single,pins = <
+ 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */
+ >;
+ };
+};
+
+&led_wkgpio_pins {
+ pinctrl-single,pins = <
+ 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */
+ >;
+};
+
+&leds {
+ pinctrl-0 = <
+ &led_gpio_pins
+ &led_wkgpio_pins
+ >;
+
+ heartbeat {
+ gpios = <&gpio4 14 0>;
+ };
+ mmc {
+ gpios = <&gpio1 8 0>;
+ };
+};
Any additional comments besides the headline?
If not I will post v7
Sorry for the delay.
Go ahead and I'll take it in my dts branch for 3.11.
Thanks,
Benoit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
