Hello Kevin,
On 06/01/2013 12:45 AM, Kevin Hilman wrote:
Using the gpio-keys bindings, configure the user button on Beagle
boards. Since the user button is enabled as a wakeup source, also
ensure the GPIO pin is mux'd correctly and has IO ring wakeups enabled,
so it can also wakeup from off mode.
Signed-off-by: Kevin Hilman <khil...@linaro.org>
---
arch/arm/boot/dts/omap3-beagle-xm.dts | 25 +++++++++++++++++++++++++
arch/arm/boot/dts/omap3-beagle.dts | 25 +++++++++++++++++++++++++
2 files changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts
b/arch/arm/boot/dts/omap3-beagle-xm.dts
index ca067b0..c93c36f 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -57,6 +57,26 @@
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ user {
+ label = "user";
+ gpios = <&gpio1 4 0>;
Now you can also use GPIO constants (include/dt-bindings/gpio/gpio.h),
like this:
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x114>;
+ gpio-key,wakeup;
+ };
+
+ };
+};
+
+&omap3_pmx_wkup {
+ gpio1_pins: pinmux_gpio1_pins {
+ pinctrl-single,pins = <
+ 0x0e 0x4104 /* sys_boot2.gpio_4 WAKEUP | INPUT |
MODE4 */
As for patch 1, you can use pinctrl constants
+ >;
+ };
};
&i2c1 {
@@ -140,3 +160,8 @@
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_pins>;
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts
b/arch/arm/boot/dts/omap3-beagle.dts
index b004372..c9794cb 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -71,6 +71,26 @@
reset-supply = <&hsusb2_reset>;
vcc-supply = <&hsusb2_power>;
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ user {
+ label = "user";
+ gpios = <&gpio1 7 0>;
GPIO constant
gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x114>;
+ gpio-key,wakeup;
+ };
+
+ };
+};
+
+&omap3_pmx_wkup {
+ gpio1_pins: pinmux_gpio1_pins {
+ pinctrl-single,pins = <
+ 0x14 0x4104 /* sys_boot5.gpio_7 WAKEUP | INPUT |
MODE4 */
Same for pinctrl constant
+ >;
+ };
};
&omap3_pmx_core {
@@ -154,3 +174,8 @@
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_pins>;
+};
Regards,
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
