Hi,
On Tue, Jun 04, 2013 at 10:40:37AM +0300, Tomi Valkeinen wrote:
> I've made some big changes on the omapdss device model, which involves
> converting all the panel drivers. I've got only a bunch of boards, so I
> hope some of you can perhaps do some minimal tests on some other boards.
>
> I've got: Beagle (old one), Panda, 4430SDP, Overo with LCD43.
>
> The code can be found from the below git branch. It's based on 3.10-rc1.
>
> git://gitorious.org/linux-omap-dss2/linux.git work/dss-dev-model
>
> All you need to do to get things working is to enable the new panel
> drivers from kernel config, under Device drivers/Graphics support/OMAP2+
> Display Subsystem support/OMAP Display Device Drivers/
I tested Nokia N900 by pulling your tree and doing the following .config
changes:
# CONFIG_PANEL_ACX565AKM is not set
CONFIG_PANEL_SONY_ACX565AKM=y
The frame buffer console seems to work OK.
A.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
