On Friday 07 June 2013 02:37 PM, Tony Lindgren wrote: > * Santosh Shilimkar <santosh.shilim...@ti.com> [130607 11:20]: >> On Friday 07 June 2013 01:50 PM, Tony Lindgren wrote: >>> * Tony Lindgren <t...@atomide.com> [130607 09:35]: >>>> * Paul Walmsley <p...@pwsan.com> [130607 05:38]: >>>>> On Fri, 7 Jun 2013, Sricharan R wrote: >>>>> >>>>>> - The IO resource information like dma request lines, irq number and >>>>>> ocp address space can be populated via dt blob. So such data is >>>>>> stripped >>>>>> from OMAP4 SOC hwmod data file. >>>>>> >>>>>> - The devices which are still missing the device tree bindings, >>>>>> address space entries are not removed yet. When such devices add >>>>>> the dt bindings, respective address space data can be deleted. >>>>>> >>>>>> - Also other unnecessary hwmods like firewalls are removed as a part of >>>>>> this. >>>>>> Since emif was getting registered only because of this firewalls links, >>>>>> the mpu->emif direct link is added now. >>>>>> >>>>>> The above update, results in reduction of about ~1650 lines of code. >>>>>> >>>>>> Signed-off-by: Santosh Shilimkar <santosh.shilim...@ti.com> >>>>>> Signed-off-by: Sricharan R <r.sricha...@ti.com> >>>>> >>>>> Acked-by: Paul Walmsley <p...@pwsan.com> >>>>> >>>>> Can't test this one since I don't have an OMAP4 DT config set up in the >>>>> testbed >>>>> yet. Maybe will add that to the testbed after the v3.10 release. >>>> >>>> OK thanks, applying into omap-for-v3.11/cleanup. >>> >>> I had to undo the following parts to avoid regressions on omap4sdp. >>> Can you please follow up on fixing the related issues so the fixup >>> won't be needed? >>> >>> Seems to work now the same way as earlier for both omap4sdp and blaze >>> es, except for DSS, which seems to be a separate issue as posted by >>> Tomi. Pushed out now to omap-for-v3.11/cleanup. >>> >> Thats strange. You shouldn't need those fixes since that data is >> expected to be coming from DT. >> >> Sricharan, Can you please try out the patch against Tony's >> V3.11/clean-up branch and see whats missing there. > > Looking at the diff output with and without, it seems to be that the > DMA channels won't get configured. > That should work since DMA engine changes are in mainline and the DMA channel information is already in DT.
regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
