Introduce mcspi_bytes_per_word function as replacement for the next code
fragment:

int c = (word_len <= 8)  ? 1 :
        (word_len <= 16) ? 2 :
        /* word_len <= 32 */ 4;

This code used 2 times in current driver code and will be used 2 times in
the next FIFO buffer support patch. Replace it with inline function with clear
name to improve code legibility.

Signed-off-by: Illia Smyrnov <illia.smyr...@ti.com>
---
 drivers/spi/spi-omap2-mcspi.c |   19 +++++++++++++------
 1 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 86d2158..707f1db 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -187,6 +187,16 @@ static inline void mcspi_write_chconf0(const struct 
spi_device *spi, u32 val)
        mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
 }
 
+static inline int mcspi_bytes_per_word(int word_len)
+{
+       if (word_len <= 8)
+               return 1;
+       else if (word_len <= 16)
+               return 2;
+       else /* word_len <= 32 */
+               return 4;
+}
+
 static void omap2_mcspi_set_dma_req(const struct spi_device *spi,
                int is_read, int enable)
 {
@@ -433,10 +443,9 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct 
spi_transfer *xfer,
                        else /* word_len <= 32 */
                                ((u32 *)xfer->rx_buf)[elements++] = w;
                } else {
+                       int bytes_per_word = mcspi_bytes_per_word(word_len);
                        dev_err(&spi->dev, "DMA RX penultimate word empty");
-                       count -= (word_len <= 8)  ? 2 :
-                               (word_len <= 16) ? 4 :
-                               /* word_len <= 32 */ 8;
+                       count -= (bytes_per_word << 1);
                        omap2_mcspi_set_enable(spi, 1);
                        return count;
                }
@@ -454,9 +463,7 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct 
spi_transfer *xfer,
                        ((u32 *)xfer->rx_buf)[elements] = w;
        } else {
                dev_err(&spi->dev, "DMA RX last word empty");
-               count -= (word_len <= 8)  ? 1 :
-                        (word_len <= 16) ? 2 :
-                      /* word_len <= 32 */ 4;
+               count -= mcspi_bytes_per_word(word_len);
        }
        omap2_mcspi_set_enable(spi, 1);
        return count;
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to