On Mon, 3 Jun 2013 23:39:16 -0700, Mike Turquette <[email protected]> wrote: > Parses OMAP clock data from DT and registers those clocks with the clock > framework. dt_omap_clk_init must be called early during boot for timer > initialization so it is exported and called from the existing clock code > instead of probing like a real driver. > > Cc: Benoit Cousson <[email protected]> > Cc: Rajendra Nayak <[email protected]> > Cc: Joel A Fernandes <[email protected]> > Cc: Nishanth Menon <[email protected]> > Cc: Paul Walmsley <[email protected]> > Cc: Tony Lindgren <[email protected]> > Signed-off-by: Mike Turquette <[email protected]>
Hi Mike, Comments below... > --- > This driver simply matches the basic bindings (so far). Eventually it > would match omap-specific bindings for DPLLs, CLKOUTX2 and strange leaf > clocks as well. This doesn't scale well since non-OMAP related clock > data (e.g. a pmic or discrete audio codec) will get grouped into this > driver if it matches on a basic clock type. Suggestions? Take a look at the definition of irqchip_init(). It would be possible to do the same think for clk chips so that merely configuring in the driver would add the support to a global list of clk chip initializers. drivers/irqchip/irqchip.c > > drivers/clk/Makefile | 1 + > drivers/clk/omap/Makefile | 1 + > drivers/clk/omap/clk.c | 55 > +++++++++++++++++++++++++++++++++++++++++++++++ > include/linux/clk/omap.h | 24 +++++++++++++++++++++ > 4 files changed, 81 insertions(+) > create mode 100644 drivers/clk/omap/Makefile > create mode 100644 drivers/clk/omap/clk.c > create mode 100644 include/linux/clk/omap.h > > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile > index f51b52b..efd4f2a 100644 > --- a/drivers/clk/Makefile > +++ b/drivers/clk/Makefile > @@ -31,6 +31,7 @@ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o > obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o > obj-$(CONFIG_ARCH_TEGRA) += tegra/ > obj-$(CONFIG_PLAT_SAMSUNG) += samsung/ > +obj-$(CONFIG_ARCH_OMAP) += omap/ > > obj-$(CONFIG_X86) += x86/ > > diff --git a/drivers/clk/omap/Makefile b/drivers/clk/omap/Makefile > new file mode 100644 > index 0000000..8195931 > --- /dev/null > +++ b/drivers/clk/omap/Makefile > @@ -0,0 +1 @@ > +obj-y += clk.o > diff --git a/drivers/clk/omap/clk.c b/drivers/clk/omap/clk.c > new file mode 100644 > index 0000000..e9e5c95 > --- /dev/null > +++ b/drivers/clk/omap/clk.c > @@ -0,0 +1,55 @@ > +/* > + * OMAP PRCM clock driver > + * > + * Copyright (C) 2013 Linaro.org - http://www.linaro.org > + * Mike Turquette <[email protected]> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether express or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/clk-provider.h> > +#include <linux/clk/omap.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > + > +/* FIXME - should the OMAP PRCM clock driver match generic types? */ > +static const struct of_device_id clk_match[] = { > + {.compatible = "fixed-clock", .data = of_fixed_clk_setup, }, > + {.compatible = "mux-clock", .data = of_mux_clk_setup, }, > + {.compatible = "fixed-factor-clock", > + .data = of_fixed_factor_clk_setup, }, > + {}, > +}; > + > +static int omap_clk_probe(struct platform_device *pdev) > +{ > + of_clk_init(clk_match); > + return 0; > +} > + > +static struct platform_driver omap_clk_driver = { > + .probe = omap_clk_probe, > + .driver = { > + .name = "omap_clk", > + .of_match_table = of_match_ptr(clk_match), > + }, > +}; > + > +/* FIXME - need to initialize early; skip real driver registration & probe */ > +int __init dt_omap_clk_init(void) > +{ > + return omap_clk_probe(NULL); > +} Since this isn't remotely a platform_driver, I would drop the pretense and cut out all the platform_drivers references. omap_clk_driver isn't even referenced anywhere! > + > +MODULE_DESCRIPTION("OMAP Clock driver"); > +MODULE_AUTHOR("Texas Instruments Inc."); > +MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/clk/omap.h b/include/linux/clk/omap.h > new file mode 100644 > index 0000000..504e838 > --- /dev/null > +++ b/include/linux/clk/omap.h > @@ -0,0 +1,24 @@ > +/* > + * Copyright (C) 2010 Broadcom > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA > + */ > + > +#ifndef __LINUX_CLK_OMAP_H_ > +#define __LINUX_CLK_OMAP_H_ > + > +int __init dt_omap_clk_init(void); __init annotations don't generally go in the header files. g. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
