When an OMAP GPIO is used as an IRQ line, a call to gpio_request()
has to be made to initialize the OMAP GPIO bank before a driver
request the IRQ. Otherwise the call to request_irq() fails.

Drives should not be aware of this neither care wether an IRQ line
is a GPIO or not. They should just request the IRQ and this has to
be handled by the irq_chip driver.

With the current OMAP GPIO DT binding, if we define:

                gpio6: gpio@49058000 {
                        compatible = "ti,omap3-gpio";
                        reg = <0x49058000 0x200>;
                        interrupts = <34>;
                        ti,hwmods = "gpio6";
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupt-cells = <2>;
                };

                interrupt-parent = <&gpio6>;
                interrupts = <16 8>;

The GPIO is correctly mapped as an IRQ but a call to gpio_request()
is never made. Since a call to the custom IRQ domain .map function
handler is made for each GPIO used as an IRQ, the GPIO can be setup
and configured as input there automatically.

Signed-off-by: Javier Martinez Canillas <[email protected]>
---

Changes since v1:
  - Split the irq domain mapping function handler and the GPIO
    request in two different patches.

 drivers/gpio/gpio-omap.c |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 31cbe65..5ec6a00 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1092,6 +1092,8 @@ static int omap_gpio_irq_map(struct irq_domain *d, 
unsigned int virq,
                             irq_hw_number_t hwirq)
 {
        struct gpio_bank *bank = d->host_data;
+       int gpio;
+       int ret;
 
        if (!bank)
                return -EINVAL;
@@ -1106,6 +1108,13 @@ static int omap_gpio_irq_map(struct irq_domain *d, 
unsigned int virq,
                                                 handle_simple_irq);
                        set_irq_flags(virq, IRQF_VALID);
                }
+
+               gpio = irq_to_gpio(bank, hwirq);
+               ret = gpio_request_one(gpio, GPIOF_IN, NULL);
+               if (ret) {
+                       dev_err(bank->dev, "Could not request GPIO%d\n", gpio);
+                       return ret;
+               }
        }
 
        return 0;
-- 
1.7.7.6

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to