>
> On Tuesday 02 July 2013, Pekon Gupta wrote:
> > (+ CC: devicetree-disc...@lists.ozlabs.org)
> >
> > Changes v3 -> v4
> > - [Patch 1/3] removed MTD_NAND_OMAP_BCH8 &
> MTD_NAND_OMAP_BCH4 from nand/Kconfig
> > ECC scheme selectable via nand DT (nand-ecc-opt).
> > - [*] rebased for l2-mtd.git
>
> Do you also fix these build error?
>
> /git/arm-soc/drivers/mtd/nand/omap2.c: In function 'omap_nand_probe':
> /git/arm-soc/drivers/mtd/nand/omap2.c:1964:7: error:
> 'OMAP_ECC_BCH8_CODE_HW_DETECTION_SW' undeclared (first use in this
> function)
> case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
> ^
> /git/arm-soc/drivers/mtd/nand/omap2.c:1964:7: note: each undeclared
> identifier is reported only once for each function it appears in
> /git/arm-soc/drivers/mtd/nand/omap2.c:1991:7: error:
> 'OMAP_ECC_BCH4_CODE_HW_DETECTION_SW' undeclared (first use in this
> function)
> case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
> ^
>
>
> Arnd
[Pekon]: Yes, I'm not seeing these build issues, as I'm cleanly
returning from probe with pr_err(), if the required libraries (/lib/bch.c)
are not build-in the system.
-------------------
[Patch v4 1/4]: mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC..
@@static int omap_nand_probe(struct platform_device *pdev)
+ default:
+ pr_err("selected ECC scheme not supported or not enabled\n");
+ err = -EINVAL;
+ goto out_release_mem_region;
+ }
-------------------
However, if you are still seeing this, could you please send me your config?
with regards, pekon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
