Hi Peter
On Fri, Jul 19, 2013 at 05:29:44PM +0200, Michael Trimarchi wrote:
> Hi
>
> On 07/19/2013 03:33 PM, Michael Trimarchi wrote:
> > Hi
> >
> > I'm trying to understand what is wrong here with this small
> > driver.
> >
> > /* McBSP1 */
> > OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
> > OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
> > OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
> > OMAP_PULL_ENA),
> > OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
> >
> > kernel 3.8.0
> >
>
> I have fixed my problem ;). I will send a description about it
>
> Michael
>
I will prepare a proper patch. But OMAP supports (both omap3/omap4) the
SND_SOC_DAIFMT_CBM_CFS format in this way. I have already tested it on
my devkit platform
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 8d2defd..85dd415 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -435,6 +435,11 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai
*cpu_dai,
/* Sample rate generator drives the FS */
regs->srgr2 |= FSGM;
break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ /* McBSP slave. FS clock as output */
+ regs->srgr2 |= FSGM;
+ regs->pcr0 |= FSXM;
+ break;
case SND_SOC_DAIFMT_CBM_CFM:
/* McBSP slave */
break;
Best regards
Michael
> > [ 107.276702] omap-mcbsp omap-mcbsp.1: Configuring McBSP1 phys_base:
> > 0x40122000
> > [ 107.283691] omap-mcbsp omap-mcbsp.1: **** McBSP1 regs ****
> > [ 107.283721] omap-mcbsp omap-mcbsp.1: DRR2: 0x88260a09
> > [ 107.283721] omap-mcbsp omap-mcbsp.1: DRR1: 0x0000
> > [ 107.283752] omap-mcbsp omap-mcbsp.1: DXR2: 0x0000
> > [ 107.283752] omap-mcbsp omap-mcbsp.1: DXR1: 0x0000
> > [ 107.283752] omap-mcbsp omap-mcbsp.1: SPCR2: 0x0233
> > [ 107.283782] omap-mcbsp omap-mcbsp.1: SPCR1: 0x0030
> > [ 107.283782] omap-mcbsp omap-mcbsp.1: RCR2: 0x80a1
> > [ 107.283813] omap-mcbsp omap-mcbsp.1: RCR1: 0x00a0
> > [ 107.283813] omap-mcbsp omap-mcbsp.1: XCR2: 0x80a1
> > [ 107.283813] omap-mcbsp omap-mcbsp.1: XCR1: 0x00a0
> > [ 107.283843] omap-mcbsp omap-mcbsp.1: SRGR2: 0x203f
> > [ 107.283843] omap-mcbsp omap-mcbsp.1: SRGR1: 0x1f00
> > [ 107.283843] omap-mcbsp omap-mcbsp.1: PCR0: 0x008f
> > [ 107.283874] omap-mcbsp omap-mcbsp.1: ***********************
> > [ 119.926177] omap-dma-engine omap-dma-engine: freeing channel for 33
> >
> > Well basically it doesn't start the transfer. The clock is provided
> > using the clkx pin. clkx is rate * channel * bitsxword and come from
> > the codec.
> >
> > What is wrong? (I know that how I register the card is deprecated)
> >
> > Regards Michael
> >
> > /*
> > * dacmax.c -- SoC audio for pandaboard demokit
> > *
> > * Author: Michael Trimarchi <mich...@amarulasolutions.com>
> > *
> > * Based on:
> > * Author: Misael Lopez Cruz <x0052...@ti.com>
> > *
> > * This program is free software; you can redistribute it and/or
> > * modify it under the terms of the GNU General Public License
> > * version 2 as published by the Free Software Foundation.
> > *
> > * This program is distributed in the hope that it will be useful, but
> > * WITHOUT ANY WARRANTY; without even the implied warranty of
> > * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> > * General Public License for more details.
> > *
> > * You should have received a copy of the GNU General Public License
> > * along with this program; if not, write to the Free Software
> > * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> > * 02110-1301 USA
> > *
> > */
> >
> > #include <linux/clk.h>
> > #include <linux/platform_device.h>
> > #include <sound/core.h>
> > #include <sound/pcm.h>
> > #include <sound/pcm_params.h>
> > #include <sound/soc.h>
> >
> > #include <asm/mach-types.h>
> > #include <linux/gpio.h>
> > #include <linux/platform_data/asoc-ti-mcbsp.h>
> >
> > #include <linux/module.h>
> > #include "omap-mcbsp.h"
> >
> > static struct snd_soc_card snd_soc_dacmax;
> >
> > static int dacmax_hw_params(struct snd_pcm_substream *substream,
> > struct snd_pcm_hw_params *params)
> > {
> > int ret;
> > struct snd_soc_pcm_runtime *rtd = substream->private_data;
> > struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
> >
> > pr_info("%s: setting the params\n", __func__);
> >
> > ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_SYSCLK_CLKX_EXT, 0,
> > SND_SOC_CLOCK_IN);
> > if (ret < 0) {
> > printk(KERN_ERR "can't set CPU system clock " \
> > "OMAP_MCBSP_CLKR_SRC_CLKX\n");
> > }
> >
> > return 0;
> > }
> >
> > static struct snd_soc_ops dacmax_ops = {
> > .hw_params = dacmax_hw_params,
> > };
> >
> > static int dacmax_init(struct snd_soc_pcm_runtime *rtd)
> > {
> > pr_info("%s: INIT\n", __func__);
> > return 0;
> > }
> >
> > /* Digital audio interface glue - connects codec <--> CPU */
> > static struct snd_soc_dai_link dacmax_dai = {
> > .name = "DACMAX-I2S",
> > .stream_name = "DACMAX-Audio",
> > .cpu_dai_name = "omap-mcbsp.1",
> > .codec_dai_name = "pcm1792a-hifi",
> > .platform_name = "omap-pcm-audio",
> > .codec_name = "pcm1792a",
> > .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
> > SND_SOC_DAIFMT_CBM_CFM,
> > .init = dacmax_init,
> > .ops = &dacmax_ops,
> > };
> >
> > /* Audio machine driver */
> > static struct snd_soc_card snd_soc_dacmax = {
> > .name = "DACMAX",
> > .driver_name = "OMAP4",
> > .long_name = "TI OMAP4 Board",
> > .dai_link = &dacmax_dai,
> > .num_links = 1,
> > };
> >
> > static struct platform_device *dacmax_snd_device;
> >
> > static int __init dacmax_soc_init(void)
> > {
> > int ret;
> >
> > printk(KERN_INFO "DACMAX SoC init\n");
> >
> > dacmax_snd_device = platform_device_alloc("soc-audio", -1);
> > if (!dacmax_snd_device) {
> > printk(KERN_ERR "Platform device allocation failed\n");
> > return -ENOMEM;
> > }
> >
> > platform_set_drvdata(dacmax_snd_device, &snd_soc_dacmax);
> >
> > ret = platform_device_add(dacmax_snd_device);
> > if (ret)
> > goto err1;
> >
> > return 0;
> >
> > err1:
> > printk(KERN_ERR "Unable to add platform device\n");
> > platform_device_put(dacmax_snd_device);
> >
> > return ret;
> > }
> > module_init(dacmax_soc_init);
> >
> > static void __exit dacmax_soc_exit(void)
> > {
> > platform_device_unregister(dacmax_snd_device);
> > }
> > module_exit(dacmax_soc_exit);
> >
> > MODULE_AUTHOR("Michael Trimarchi <mich...@amurulasolutions.com>");
> > MODULE_DESCRIPTION("ALSA SoC DACMAX");
> > MODULE_LICENSE("GPL");
> >
>
>
> --
> | Michael Nazzareno Trimarchi Amarula Solutions BV |
> | COO - Founder Cruquiuskade 47 |
> | +31(0)851119172 Amsterdam 1018 AM NL |
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
