On Tue, 23 Jul 2013, Grygorii Strashko wrote:
> From: Oleksandr Dmytryshyn <oleksandr.dmytrys...@ti.com>
>
> This patch adds interrupt mapping table for the twl6032.
Repeating the $SUBJECT line is never helpful.
> Signed-off-by: Oleksandr Dmytryshyn <oleksandr.dmytrys...@ti.com>
> Signed-off-by: Grygorii Strashko <grygorii.stras...@ti.com>
> ---
> drivers/mfd/twl6030-irq.c | 49
> ++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 48 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
> index 89f130b..e4df87f 100644
> --- a/drivers/mfd/twl6030-irq.c
> +++ b/drivers/mfd/twl6030-irq.c
> @@ -41,6 +41,7 @@
> #include <linux/suspend.h>
> #include <linux/of.h>
> #include <linux/irqdomain.h>
> +#include <linux/of_device.h>
>
> #include "twl-core.h"
>
> @@ -84,6 +85,36 @@ static int twl6030_interrupt_mapping[24] = {
> CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
> RSV_INTR_OFFSET, /* Bit 23 Reserved */
> };
> +
> +static int twl6032_interrupt_mapping[24] = {
> + PWR_INTR_OFFSET, /* Bit 0 PWRON */
> + PWR_INTR_OFFSET, /* Bit 1 RPWRON */
> + PWR_INTR_OFFSET, /* Bit 2 SYS_VLOW */
> + RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
> + RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
> + HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
> + SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
> + PWR_INTR_OFFSET, /* Bit 7 SPDURATION */
> +
> + PWR_INTR_OFFSET, /* Bit 8 WATCHDOG */
> + BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
> + SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
> + MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
> + MADC_INTR_OFFSET, /* Bit 12 GPADC_RT_EOC */
> + MADC_INTR_OFFSET, /* Bit 13 GPADC_SW_EOC */
> + GASGAUGE_INTR_OFFSET, /* Bit 14 CC_EOC */
> + GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
> +
> + USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
> + USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
> + USBOTG_INTR_OFFSET, /* Bit 18 ID */
> + USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */
> + CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
> + CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */
> + CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
OCD failure. ;)
NB: Kidding, you don't have to do anything about this.
> + RSV_INTR_OFFSET, /* Bit 23 Reserved */
> +};
> +
> /*----------------------------------------------------------------------*/
>
> static unsigned twl6030_irq_base;
> @@ -91,6 +122,7 @@ static int twl_irq;
> static bool twl_irq_wake_enabled;
>
> static atomic_t twl6030_wakeirqs = ATOMIC_INIT(0);
> +static const int *irq_mapping_tbl;
What I'd actually like to see is the creation of 'struct twl6030' to
keep all your goodies in; irq_domain, irq_mapping_tbl etc and for you
to pass that around instead of creating more global variables e.g. via
request_threaded_irq(..., void *dev_id) to access the aforementioned
information.
> static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
> unsigned long pm_event, void *unused)
> @@ -164,7 +196,7 @@ static irqreturn_t twl6030_irq_thread(int irq, void *data)
> if (sts.int_sts & 0x1) {
> int module_irq =
> irq_find_mapping(irq_domain,
> - twl6030_interrupt_mapping[i]);
> + irq_mapping_tbl[i]);
> if (module_irq)
> handle_nested_irq(module_irq);
> else
> @@ -339,6 +371,12 @@ static struct irq_domain_ops twl6030_irq_domain_ops = {
> .xlate = irq_domain_xlate_onetwocell,
> };
>
> +static const struct of_device_id twl6030_of_match[] = {
> + {.compatible = "ti,twl6030", &twl6030_interrupt_mapping},
> + {.compatible = "ti,twl6032", &twl6032_interrupt_mapping},
> + { },
> +};
> +
> int twl6030_init_irq(struct device *dev, int irq_num)
> {
> struct device_node *node = dev->of_node;
> @@ -346,6 +384,15 @@ int twl6030_init_irq(struct device *dev, int irq_num)
> int status;
> u8 mask[3];
> struct irq_domain *irq_domain;
> + const struct of_device_id *of_id;
> +
> + of_id = of_match_device(twl6030_of_match, dev);
> + if (!of_id || !of_id->data) {
> + dev_err(dev, "Unknown TWL device model\n");
> + return -EINVAL;
> + }
> +
> + irq_mapping_tbl = of_id->data;
>
> nr_irqs = TWL6030_NR_IRQS;
>
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
