On 07/27/2013 01:39 AM, Sourav Poddar wrote:
This patch disabled I2C/SPI/UART device initially(status = "disabled").
This devices will only be probed, if the devices are
present in the dts file(status = "okay").
Signed-off-by: Sourav Poddar <sourav.pod...@ti.com>
Personally, I like this, though, if we are doing this, it should not be
piecemeal - existing OMAP generation SoCs should follow this for all
boards, else we will have a mishmash of the way we have hardware blocks
are used. i2c-spi expect board files to set status=okay, but,
GPIOs/UARTs/MMC/keypad etc - not so.. it tends to be tricky when others
look at the resultant code.
---
arch/arm/boot/dts/omap5-uevm.dts | 10 +++++++++-
arch/arm/boot/dts/omap5.dtsi | 15 +++++++++++++++
2 files changed, 24 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 08b7267..aef8de1 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -259,6 +259,7 @@
};
&i2c1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@@ -431,6 +432,7 @@
};
&i2c5 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_pins>;
@@ -451,35 +453,41 @@
};
&mcspi1 {
-
+ status = "okay";
};
&mcspi2 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcspi2_pins>;
};
&mcspi3 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcspi3_pins>;
};
&mcspi4 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcspi4_pins>;
};
&uart1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
};
&uart3 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&uart5 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart5_pins>;
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index e643620..fcd28c9 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -238,6 +238,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
+ status = "disabled";
};
i2c2: i2c@48072000 {
@@ -247,6 +248,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
+ status = "disabled";
};
i2c3: i2c@48060000 {
@@ -256,6 +258,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
+ status = "disabled";
};
i2c4: i2c@4807a000 {
@@ -265,6 +268,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
+ status = "disabled";
};
i2c5: i2c@4807c000 {
@@ -274,6 +278,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c5";
+ status = "disabled";
};
mcspi1: spi@48098000 {
@@ -294,6 +299,7 @@
<&sdma 42>;
dma-names = "tx0", "rx0", "tx1", "rx1",
"tx2", "rx2", "tx3", "rx3";
+ status = "disabled";
};
mcspi2: spi@4809a000 {
@@ -309,6 +315,7 @@
<&sdma 45>,
<&sdma 46>;
dma-names = "tx0", "rx0", "tx1", "rx1";
+ status = "disabled";
};
mcspi3: spi@480b8000 {
@@ -321,6 +328,7 @@
ti,spi-num-cs = <2>;
dmas = <&sdma 15>, <&sdma 16>;
dma-names = "tx0", "rx0";
+ status = "disabled";
};
mcspi4: spi@480ba000 {
@@ -333,6 +341,7 @@
ti,spi-num-cs = <1>;
dmas = <&sdma 70>, <&sdma 71>;
dma-names = "tx0", "rx0";
+ status = "disabled";
};
uart1: serial@4806a000 {
@@ -341,6 +350,7 @@
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart2: serial@4806c000 {
@@ -349,6 +359,7 @@
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart3: serial@48020000 {
@@ -357,6 +368,7 @@
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart4: serial@4806e000 {
@@ -365,6 +377,7 @@
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart5: serial@48066000 {
@@ -373,6 +386,7 @@
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart6: serial@48068000 {
@@ -381,6 +395,7 @@
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
+ status = "disabled";
};
mmc1: mmc@4809c000 {
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html