On Monday 29 July 2013 08:58 PM, Kamil Debski wrote:
> Hi Kishon,
> 
> A small fix follows inline.
> 
>> From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
>> ow...@vger.kernel.org] On Behalf Of Kishon Vijay Abraham I
>> Sent: Friday, July 26, 2013 2:49 PM
>>
>> The PHY framework provides a set of APIs for the PHY drivers to
>> create/destroy a PHY and APIs for the PHY users to obtain a reference
>> to the PHY with or without using phandle. For dt-boot, the PHY drivers
>> should also register *PHY provider* with the framework.
>>
>> PHY drivers should create the PHY by passing id and ops like init, exit,
>> power_on and power_off. This framework is also pm runtime enabled.
>>
>> The documentation for the generic PHY framework is added in
>> Documentation/phy.txt and the documentation for dt binding can be found
>> at Documentation/devicetree/bindings/phy/phy-bindings.txt
>>
>> Cc: Tomasz Figa <t.f...@samsung.com>
>> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
>> Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
>> Acked-by: Felipe Balbi <ba...@ti.com>
>> Tested-by: Sylwester Nawrocki <s.nawro...@samsung.com>
>> ---
>>  .../devicetree/bindings/phy/phy-bindings.txt       |   66 ++
>>  Documentation/phy.txt                              |  166 +++++
>>  MAINTAINERS                                        |    8 +
>>  drivers/Kconfig                                    |    2 +
>>  drivers/Makefile                                   |    2 +
>>  drivers/phy/Kconfig                                |   18 +
>>  drivers/phy/Makefile                               |    5 +
>>  drivers/phy/phy-core.c                             |  714
>> ++++++++++++++++++++
>>  include/linux/phy/phy.h                            |  270 ++++++++
>>  9 files changed, 1251 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/phy/phy-
>> bindings.txt
>>  create mode 100644 Documentation/phy.txt  create mode 100644
>> drivers/phy/Kconfig  create mode 100644 drivers/phy/Makefile  create
>> mode 100644 drivers/phy/phy-core.c  create mode 100644
>> include/linux/phy/phy.h
>>
> 
> [snip]
> 
>> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h new file
>> mode 100644 index 0000000..e444b23
>> --- /dev/null
>> +++ b/include/linux/phy/phy.h
>> @@ -0,0 +1,270 @@
> 
> [snip]
> 
>> +struct phy_init_data {
>> +    unsigned int num_consumers;
>> +    struct phy_consumer *consumers;
>> +};
>> +
>> +#define PHY_CONSUMER(_dev_name, _port)                              \
>> +{                                                           \
>> +    .dev_name       = _dev_name,                            \
>> +    .port           = _port,                                \
>> +}
>> +
>> +#define     to_phy(dev)     (container_of((dev), struct phy, dev))
>> +
>> +#define     of_phy_provider_register(dev, xlate)    \
>> +    __of_phy_provider_register((dev), THIS_MODULE, (xlate))
>> +
>> +#define     devm_of_phy_provider_register(dev, xlate)       \
>> +    __of_phy_provider_register((dev), THIS_MODULE, (xlate))
> 
> I think this should be:
> +     __devm_of_phy_provider_register((dev), THIS_MODULE, (xlate))
> Right?

right.. thanks for spotting this.

Regards
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to