On 07/30/2013 10:33 PM, Nishanth Menon wrote:
On 07/23/2013 02:20 AM, Tero Kristo wrote:
clk-44xx.c now contains the clock init functionality for omap4, including
DT clock registration and adding of static clkdev entries.

Signed-off-by: Tero Kristo <t-kri...@ti.com>
---
  drivers/clk/omap/clk-44xx.c |  118
+++++++++++++++++++++++++++++++++++++++++++
  1 file changed, 118 insertions(+)
  create mode 100644 drivers/clk/omap/clk-44xx.c

diff --git a/drivers/clk/omap/clk-44xx.c b/drivers/clk/omap/clk-44xx.c
new file mode 100644
index 0000000..cc12134
--- /dev/null
+++ b/drivers/clk/omap/clk-44xx.c
@@ -0,0 +1,118 @@
+/*
+ * OMAP4 Clock data
+ *
+ * Copyright (C) 2009-2012 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Paul Walmsley (p...@pwsan.com)
+ * Rajendra Nayak (rna...@ti.com)
+ * Benoit Cousson (b-cous...@ti.com)
+ * Mike Turquette (mturque...@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX Some of the ES1 clocks have been removed/changed; once support
+ * is added for discriminating clocks by ES level, these should be
added back
+ * in.
+ *
+ * XXX All of the remaining MODULEMODE clock nodes should be removed
+ * once the drivers are updated to use pm_runtime or to use the
appropriate
+ * upstream clock node for rate/parent selection.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/clk/omap.h>
+
+/*
+ * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
+ * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
+ * must be set to 196.608 MHz" and hence, the DPLL locked frequency is
+ * half of this value.
+ */
+#define OMAP4_DPLL_ABE_DEFFREQ                98304000
+
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ                960000000
+
+static struct omap_dt_clk omap44xx_clks[] = {
+    DT_CLK("smp_twd",    NULL,            "mpu_periphclk"),
+    DT_CLK("omapdss_dss", "ick", "dss_fck"),
+    DT_CLK("usbhs_omap", "fs_fck", "usb_host_fs_fck"),
+    DT_CLK("usbhs_omap", "hs_fck", "usb_host_hs_fck"),
+    DT_CLK("usbhs_omap", "usbtll_ick", "usb_tll_hs_ick"),
+    DT_CLK("usbhs_tll", "usbtll_ick", "usb_tll_hs_ick"),
+    DT_CLK(NULL,    "timer_32k_ck",    "sys_32k_ck"),
+    /* TODO: Remove "omap_timer.X" aliases once DT migration is
complete */
+    DT_CLK("omap_timer.1",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("omap_timer.2",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("omap_timer.3",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("omap_timer.4",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("omap_timer.9",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("omap_timer.10",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("omap_timer.11",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("omap_timer.5",    "timer_sys_ck",    "syc_clk_div_ck"),
+    DT_CLK("omap_timer.6",    "timer_sys_ck",    "syc_clk_div_ck"),
+    DT_CLK("omap_timer.7",    "timer_sys_ck",    "syc_clk_div_ck"),
+    DT_CLK("omap_timer.8",    "timer_sys_ck",    "syc_clk_div_ck"),
+    DT_CLK("4a318000.timer",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("48032000.timer",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("48034000.timer",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("48036000.timer",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("4803e000.timer",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("48086000.timer",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("48088000.timer",    "timer_sys_ck",    "sys_clkin_ck"),
+    DT_CLK("40138000.timer",    "timer_sys_ck",    "syc_clk_div_ck"),
+    DT_CLK("4013a000.timer",    "timer_sys_ck",    "syc_clk_div_ck"),
+    DT_CLK("4013c000.timer",    "timer_sys_ck",    "syc_clk_div_ck"),
+    DT_CLK("4013e000.timer",    "timer_sys_ck",    "syc_clk_div_ck"),

+    DT_CLK(NULL,    "cpufreq_ck",    "dpll_mpu_ck"),
please remove cpufreq.

Hmm why?

Because cpufreq is completely broken now and your current work on it? :)


+};
+
+int __init omap4xxx_clk_init(void)
+{
+    int rc;
+    struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll;
+
+    /* FIXME register clocks from DT first */
+    dt_omap_clk_init();
+
+    omap_dt_clocks_register(omap44xx_clks, ARRAY_SIZE(omap44xx_clks));
+
+    omap2_clk_disable_autoidle_all();
+
+    /*
+     * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
+     * state when turning the ABE clock domain. Workaround this by
+     * locking the ABE DPLL on boot.
+     * Lock the ABE DPLL in any case to avoid issues with audio.
+     */

But this code will be called for 4430 and 4460. if the requirement is
only for 4460, then we are not adhering to the spec?

This is copy pasted from existing cclock44xx_data.c file init function.


+    abe_dpll_ref = clk_get_sys(NULL, "abe_dpll_refclk_mux_ck");
+    sys_32k_ck = clk_get_sys(NULL, "sys_32k_ck");
+    rc = clk_set_parent(abe_dpll_ref, sys_32k_ck);
+    abe_dpll = clk_get_sys(NULL, "dpll_abe_ck");
+    if (!rc)
+        rc = clk_set_rate(abe_dpll, OMAP4_DPLL_ABE_DEFFREQ);
+    if (rc)
+        pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+
+    /*
+     * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+     * domain can transition to retention state when not in use.
+     */
+    usb_dpll = clk_get_sys(NULL, "dpll_usb_ck");
+    rc = clk_set_rate(usb_dpll, OMAP4_DPLL_USB_DEFFREQ);
+    if (rc)
+        pr_err("%s: failed to configure USB DPLL!\n", __func__);

^^^^ why cant we have a generic property that does this "automagically"
from dts property to the node?
a) be able to select a parent
b) be able to set a frequency.
c) how do we ensure that CLK_SET_RATE_PARENT are setup for the clock
nodes defined by dt?

This is probably for Mike to answer, currently such mechanism does not exist.


+
+    return 0;
+}




--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to