On 08/01/2013 09:58 AM, Roger Quadros wrote:
USB_DPLL must be initialized and locked at boot so that
USB modules can work.
Also program USB_DLL_M2 output to half rate.
Signed-off-by: Roger Quadros <rog...@ti.com>
---
drivers/clk/omap/clk-7xx.c | 11 +++++++++++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/drivers/clk/omap/clk-7xx.c b/drivers/clk/omap/clk-7xx.c
index ddb39dd..f444513 100644
--- a/drivers/clk/omap/clk-7xx.c
+++ b/drivers/clk/omap/clk-7xx.c
@@ -19,6 +19,7 @@
#define DRA7_DPLL_ABE_DEFFREQ 361267200
#define DRA7_DPLL_GMAC_DEFFREQ 1000000000
+#define DRA7_DPLL_USB_DEFFREQ 960000000
static struct omap_dt_clk dra7xx_clks[] = {
@@ -63,5 +64,15 @@ int __init dra7xx_clk_init(void)
if (rc)
pr_err("%s: failed to configure GMAC DPLL!\n", __func__);
+ dpll_ck = clk_get_sys(NULL, "dpll_usb_ck");
+ rc = clk_set_rate(dpll_ck, DRA7_DPLL_USB_DEFFREQ);
+ if (rc)
+ pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
+ dpll_ck = clk_get_sys(NULL, "dpll_usb_m2_ck");
+ rc = clk_set_rate(dpll_ck, DRA7_DPLL_USB_DEFFREQ/2);
+ if (rc)
+ pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__);
+
return rc;
}
As I had mentioned on [1] - we are going to see similar needs keep
popping up. there is no need to hack this up for even more peripherals :(
http://marc.info/?l=linux-omap&m=137536803106017&w=2
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
