Add flags for the interrupts present in HDMI wrapper block, these will be used to configure HDMI_IRQENABLE_SET/CLEAR and HDMI_IRQSTATUS registers.
Signed-off-by: Archit Taneja <[email protected]> --- drivers/video/omap2/dss/hdmi_phy.c | 3 --- drivers/video/omap2/dss/ti_hdmi.h | 15 +++++++++++++++ 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/video/omap2/dss/hdmi_phy.c b/drivers/video/omap2/dss/hdmi_phy.c index b79c56b..b7d171c 100644 --- a/drivers/video/omap2/dss/hdmi_phy.c +++ b/drivers/video/omap2/dss/hdmi_phy.c @@ -17,9 +17,6 @@ #include "dss.h" #include "ti_hdmi.h" -#define HDMI_IRQ_LINK_CONNECT (1 << 25) -#define HDMI_IRQ_LINK_DISCONNECT (1 << 26) - void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s) { #define DUMPPHY(r) seq_printf(s, "%-35s %08x\n", #r,\ diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h index cf096fd..5034080 100644 --- a/drivers/video/omap2/dss/ti_hdmi.h +++ b/drivers/video/omap2/dss/ti_hdmi.h @@ -49,6 +49,21 @@ #define HDMI_WP_AUDIO_CTRL 0x88 #define HDMI_WP_AUDIO_DATA 0x8C +/* HDMI WP IRQ flags */ + +#define HDMI_IRQ_OCP_TIMEOUT (1 << 4) +#define HDMI_IRQ_AUDIO_FIFO_UNDERFLOW (1 << 8) +#define HDMI_IRQ_AUDIO_FIFO_OVERFLOW (1 << 9) +#define HDMI_IRQ_AUDIO_FIFO_SAMPLE_REQ (1 << 10) +#define HDMI_IRQ_VIDEO_VSYNC (1 << 16) +#define HDMI_IRQ_VIDEO_FRAME_DONE (1 << 17) +#define HDMI_IRQ_PHY_LINE5V_ASSERT (1 << 24) +#define HDMI_IRQ_LINK_CONNECT (1 << 25) +#define HDMI_IRQ_LINK_DISCONNECT (1 << 26) +#define HDMI_IRQ_PLL_LOCK (1 << 29) +#define HDMI_IRQ_PLL_UNLOCK (1 << 30) +#define HDMI_IRQ_PLL_RECAL (1 << 31) + /* HDMI PLL */ #define PLLCTRL_PLL_CONTROL 0x0 -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
