From: Balaji T K <balaj...@ti.com>
Add support for sata.
[Roger Q] Clean up.
CC: Benoit Cousson <bcous...@baylibre.com>
Signed-off-by: Balaji T K <balaj...@ti.com>
Signed-off-by: Roger Quadros <rog...@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 51 +++++++++++++++++++++++++++++++++++++++++-
1 files changed, 50 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 8a88a94..a79ccb7 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -434,6 +434,53 @@
dma-names = "tx", "rx";
};
+ omap_control_sata: control-phy@4a002374 {
+ compatible = "ti,control-phy-pipe3";
+ reg = <0x4a002374 0x4>;
+ reg-names = "power";
+ clocks = <&sys_clkin>;
+ clock-names = "sysclk";
+ };
+
+ ocp2scp3: ocp2scp3@4a090000 {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "ocp2scp3";
+ reg = <0x4a090000 0x1f>; /* ocp2scp3 */
+ reg-names = "ocp2scp3";
+ sata_phy: sataphy@4A096000 {
+ compatible = "ti,phy-pipe3-sata";
+ reg = <0x4A096000 0x80>, /* phy_rx */
+ <0x4A096400 0x64>, /* phy_tx */
+ <0x4A096800 0x40>; /* pll_ctrl */
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ ctrl-module = <&omap_control_sata>;
+ clocks = <&sys_clkin>;
+ clock-names = "sysclk";
+ #phy-cells = <0>;
+ };
+ };
+
+ sata: sata@4a141100 {
+ compatible = "ti,sata";
+ ti,hwmods = "sata";
+ reg = <0x4a141100 0x7>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ dwc-ahci@4a140000 {
+ compatible = "snps,dwc-ahci";
+ reg = <0x4a140000 0x1100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ clocks = <&sata_ref_clk>;
+ clock-names = "optclk";
+ };
+ };
+
keypad: keypad@4ae1c000 {
compatible = "ti,omap4-keypad";
reg = <0x4ae1c000 0x400>;
@@ -636,6 +683,8 @@
compatible = "ti,control-phy-pipe3";
reg = <0x4a002370 0x4>;
reg-names = "power";
+ clocks = <&sys_clkin>;
+ clock-names = "sysclk";
};
omap_dwc3@4a020000 {
@@ -657,7 +706,7 @@
};
};
- ocp2scp {
+ ocp2scp1: ocp2scp1@4a080000 {
compatible = "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
