Without this the eMMC (root file system) cannot be used on N950/N9. Any ideas for a proper solution?
Signed-off-by: Aaro Koskinen <[email protected]> --- arch/arm/mach-omap2/board-generic.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 39c7838..8be49b3 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -20,6 +20,7 @@ #include <asm/mach/arch.h> #include "common.h" +#include "control.h" #include "common-board-devices.h" #include "dss-common.h" @@ -51,12 +52,26 @@ static void __init legacy_init_ehci_clk(char *clkname) } } +static void __init hsmmc2_input_clk(void) +{ + u32 reg; + + reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1); + reg |= OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1); +} + static void __init omap_generic_init(void) { omap_sdrc_init(NULL, NULL); of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); + /* HACK: Configure the MMC input clock source on N950/N9. */ + if (of_machine_is_compatible("nokia,omap3-n950") || + of_machine_is_compatible("nokia,omap3-n9")) + hsmmc2_input_clk(); + /* * HACK: call display setup code for selected boards to enable omapdss. * This will be removed when omapdss supports DT. -- 1.8.4.rc3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
