From: Fabien Parent <fpar...@baylibre.com>
Introduce a couple of real schema for OMAP DTS files. For the moment validate
only: MPU, DSP, INTC, IVA, TIME and COUNTER.
Signed-off-by: Fabien Parent <fpar...@baylibre.com>
Signed-off-by: Benoit Cousson <bcous...@baylibre.com>
---
bindings/arm/omap/counter.schema | 28 +++++++++
bindings/arm/omap/dsp.schema | 18 ++++++
bindings/arm/omap/intc.schema | 48 +++++++++++++++
bindings/arm/omap/iva.schema | 38 ++++++++++++
bindings/arm/omap/l3-noc.schema | 38 ++++++++++++
bindings/arm/omap/mpu.schema | 19 ++++++
bindings/arm/omap/omap.schema | 62 ++++++++++++++++++++
bindings/arm/omap/timer.schema | 124 +++++++++++++++++++++++++++++++++++++++
8 files changed, 375 insertions(+)
create mode 100644 bindings/arm/omap/counter.schema
create mode 100644 bindings/arm/omap/dsp.schema
create mode 100644 bindings/arm/omap/intc.schema
create mode 100644 bindings/arm/omap/iva.schema
create mode 100644 bindings/arm/omap/l3-noc.schema
create mode 100644 bindings/arm/omap/mpu.schema
create mode 100644 bindings/arm/omap/omap.schema
create mode 100644 bindings/arm/omap/timer.schema
diff --git a/bindings/arm/omap/counter.schema b/bindings/arm/omap/counter.schema
new file mode 100644
index 0000000..63b0272
--- /dev/null
+++ b/bindings/arm/omap/counter.schema
@@ -0,0 +1,28 @@
+/**
+ * OMAP Counter-32K bindings
+ */
+
+/dts-v1/;
+
+/ {
+ compatible {
+ description = "Must be 'ti,omap-counter32k' for OMAP controllers.";
+ value = "ti,omap-counter32k";
+ };
+
+ reg {
+ description = "Contains timer register address range (base address
+ and length).";
+ is-required;
+ type = "integer";
+ length = <2>;
+ };
+
+ ti,hwmods {
+ description = "Name of the hwmod associated to the counter,
+ which is typically 'counter_32k'.";
+ is-required;
+ type = "string";
+ value = "counter_32k";
+ };
+};
diff --git a/bindings/arm/omap/dsp.schema b/bindings/arm/omap/dsp.schema
new file mode 100644
index 0000000..7087f60
--- /dev/null
+++ b/bindings/arm/omap/dsp.schema
@@ -0,0 +1,18 @@
+/**
+ * TI - DSP (Digital Signal Processor)
+ */
+
+/dts-v1/;
+
+/ {
+ compatible {
+ description = "Should be 'ti,omap3-c64' for OMAP3 & 4";
+ value = "ti,omap3-c64";
+ };
+
+ ti,hwmods {
+ is-required;
+ type = "string";
+ value = "dsp";
+ };
+};
diff --git a/bindings/arm/omap/intc.schema b/bindings/arm/omap/intc.schema
new file mode 100644
index 0000000..564c80e
--- /dev/null
+++ b/bindings/arm/omap/intc.schema
@@ -0,0 +1,48 @@
+/**
+ * OMAP Interrupt Controller
+ *
+ * OMAP2/3 are using a TI interrupt controller that can support several
+ * configurable number of interrupts.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible {
+ description = "Must be 'ti,omap-counter32k' for OMAP controllers.";
+ value = "ti,omap2-intc";
+ };
+
+ interrupt-controller {
+ description = "Identifies the node as an interrupt controller";
+ is-required;
+ type = "bool";
+ };
+
+ #interrupt-cells {
+ description = "Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32>
+ and the value shall be 1.
+ The cell contains the interrupt number
+ in the range [0-128].";
+ is-required;
+ type = "integer";
+ value = <1>;
+ };
+
+ ti,intc-size {
+ description = "Number of interrupts handled
+ by the interrupt controller";
+ is-required;
+ type = "integer";
+ length = <1>;
+ };
+
+ reg {
+ description = "physical base address and size of the intc
+ registers map.";
+ is-required;
+ type = "integer";
+ length = <2>;
+ };
+};
diff --git a/bindings/arm/omap/iva.schema b/bindings/arm/omap/iva.schema
new file mode 100644
index 0000000..582c104
--- /dev/null
+++ b/bindings/arm/omap/iva.schema
@@ -0,0 +1,38 @@
+/**
+ * TI - IVA (Imaging and Video Accelerator) subsystem
+ *
+ * The IVA contain various audio, video or imaging HW accelerator
+ * depending of the version.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible {
+ value@0 {
+ description = "for OMAP4";
+ value = "ti,ivahd";
+ };
+
+ value@1 {
+ description = "for OMAP3";
+ value = "ti,iva2.2";
+ };
+
+ value@2 {
+ description = "for OMAP2430";
+ value = "ti,iva2.1";
+ };
+
+ value@3 {
+ description = "for OMAP2420";
+ value = "ti,iva1";
+ };
+ };
+
+ ti,hwmods {
+ is-required;
+ type = "string";
+ value = "iva";
+ };
+};
diff --git a/bindings/arm/omap/l3-noc.schema b/bindings/arm/omap/l3-noc.schema
new file mode 100644
index 0000000..0611c4d
--- /dev/null
+++ b/bindings/arm/omap/l3-noc.schema
@@ -0,0 +1,38 @@
+/**
+ * TI - L3 Network On Chip (NoC)
+ *
+ * This version is an implementation of the generic NoC IP
+ * provided by Arteris.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible {
+ description = "Must be 'ti,omap-counter32k' for OMAP controllers.";
+
+ value@0 {
+ description = "Should be 'ti,omap3-l3-smx' for OMAP3 family";
+ value = "ti,omap3-l3-smx";
+ };
+
+ value@1 {
+ description = "Should be 'ti,omap4-l3-noc' for OMAP4 family";
+ value = "ti,omap4-l3-noc";
+ };
+ };
+
+ reg {
+ description = "Contains L3 register address range
+ for each noc domain.";
+ is-required;
+ type = "integer";
+ };
+
+ ti,hwmods {
+ description = "'l3_main_1', ... One hwmod for each noc domain.";
+ is-required;
+ type = "string";
+ value = "l3_main_[0-9]+";
+ };
+};
diff --git a/bindings/arm/omap/mpu.schema b/bindings/arm/omap/mpu.schema
new file mode 100644
index 0000000..abf3337
--- /dev/null
+++ b/bindings/arm/omap/mpu.schema
@@ -0,0 +1,19 @@
+/**
+ * TI - MPU (Main Processor Unit) subsystem
+ *
+ * The MPU subsystem contain one or several ARM cores
+ * depending of the version.
+ * The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "ti,omap3-mpu", "ti,omap4-mpu";
+
+ ti,hwmods {
+ is-required;
+ type = "string";
+ value = "mpu";
+ };
+};
diff --git a/bindings/arm/omap/omap.schema b/bindings/arm/omap/omap.schema
new file mode 100644
index 0000000..4ed0634
--- /dev/null
+++ b/bindings/arm/omap/omap.schema
@@ -0,0 +1,62 @@
+/**
+ * Texas Instruments OMAP
+ *
+ * OMAP is currently using a static file per SoC family to describe the
+ * IPs present in the SoC.
+ * On top of that an omap_device is created to extend the platform_device
+ * capabilities and to allow binding with one or several hwmods.
+ * The hwmods will contain all the information to build the device:
+ * address range, irq lines, dma lines, interconnect, PRCM register,
+ * clock domain, input clocks.
+ * For the moment just point to the existing hwmod, the next step will be
+ * to move data from hwmod to device-tree representation.
+ *
+ *
+ * Boards:
+ *
+ * - OMAP3 BeagleBoard : Low cost community board
+ * compatible = "ti,omap3-beagle", "ti,omap3"
+ *
+ * - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
+ * compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+ *
+ * - OMAP4 SDP : Software Development Board
+ * compatible = "ti,omap4-sdp", "ti,omap4430"
+ *
+ * - OMAP4 PandaBoard : Low cost community board
+ * compatible = "ti,omap4-panda", "ti,omap4430"
+ *
+ * - OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
+ * compatible = "ti,omap3-evm", "ti,omap3"
+ *
+ * - AM335X EVM : Software Development Board for AM335x
+ * compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
+ *
+ * - AM335X Bone : Low cost community board
+ * compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
+ *
+ * - OMAP5 EVM : Evaluation Module
+ * compatible = "ti,omap5-evm", "ti,omap5"
+ *
+ * - AM43x EPOS EVM
+ * compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "ti,omap.+";
+
+ ti,hwmods {
+ description = "list of hwmod names (ascii strings), that comes
+ from the OMAP HW documentation, attached to a
+ device. Must contain at least one hwmod.";
+ type = "string";
+ };
+
+ ti,no_idle_on_suspend {
+ description = "When present, it prevents the PM to idle the module
+ during suspend.";
+ type = "bool";
+ };
+};
diff --git a/bindings/arm/omap/timer.schema b/bindings/arm/omap/timer.schema
new file mode 100644
index 0000000..b9ae19e
--- /dev/null
+++ b/bindings/arm/omap/timer.schema
@@ -0,0 +1,124 @@
+/**
+ * OMAP Timer bindings
+ */
+
+/dts-v1/;
+
+/ {
+ compatible {
+ description = "Should be set to one of the below. Please note that
+ OMAP44xx devices have timer instances that are 100%
+ register compatible with OMAP3xxx devices as well as
+ newer timers that are not 100% register compatible.
+ So for OMAP44xx devices timer instances may use
+ different compatible strings.";
+
+ value@0 {
+ description = "Applicable to OMAP24xx devices";
+ value = "ti,omap2420-timer";
+ parents {
+ root {
+ name = "";
+ compatible = "ti,omap.+";
+ };
+ };
+ };
+
+ value@1 {
+ description = "Applicable to OMAP3xxx/44xx devices";
+ value = "ti,omap3430-timer";
+ parents {
+ root {
+ name = "";
+ compatible = "ti,omap.+";
+ };
+ };
+ };
+
+ value@2 {
+ description = "Applicable to OMAP44xx devices";
+ value = "ti,omap4430-timer";
+ parents {
+ root {
+ name = "";
+ compatible = "ti,omap.+";
+ };
+ };
+ };
+
+ value@3 {
+ description = "Applicable to OMAP543x devices";
+ value = "ti,omap5430-timer";
+ parents {
+ root {
+ name = "";
+ compatible = "ti,omap.+";
+ };
+ };
+ };
+
+ value@4 {
+ description = "Applicable to AM335x devices";
+ value = "ti,am335x-timer";
+ parents {
+ root {
+ name = "";
+ compatible = "ti,am.+";
+ };
+ };
+ };
+
+ value@5 {
+ description = "Applicable to AM335x devices";
+ value = "ti,am335x-timer-1ms";
+ parents {
+ root {
+ name = "";
+ compatible = "ti,am.+";
+ };
+ };
+ };
+ };
+
+ reg {
+ description = "Contains timer register address range (base address
+ and length).";
+ is-required;
+ type = "integer";
+ };
+
+ interrupts {
+ description = "Contains the interrupt information for the timer.
+ The format is being dependent on which interrupt
+ controller the OMAP device uses.";
+ is-required;
+ type = "integer";
+ };
+
+ ti,hwmods {
+ description = "Name of the hwmod associated to the timer, 'timer<X>',
+ where <X> is the instance number of the timer from the
+ HW spec.";
+ is-required;
+ type = "string";
+ value = "timer[0-9]+";
+ };
+
+ ti,timer-alwon {
+ description = "Indicates the timer is in an alway-on power domain.";
+ type = "bool";
+ };
+
+ ti,timer-dsp {
+ description = "Indicates the timer can interrupt the on-chip DSP in
+ addition to the ARM CPU.";
+ type = "bool";
+ };
+
+ ti,timer-secure {
+ description = "Indicates the timer is reserved on a secure
+ OMAP device and therefore cannot be used
+ by the kernel";
+ type = "bool";
+ };
+};
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
