Hi Enric,

On 03/10/2013 20:17, Tony Lindgren wrote:
* Javier Martinez Canillas <[email protected]> [130925 06:18]:
On Tue, Sep 10, 2013 at 4:55 PM, Enric Balletbo i Serra
<[email protected]> wrote:
From: Enric Balletbo i Serra <[email protected]>

Hi all,

These two patches introduces initial support for the IGEP AM335x-based
platforms. The first patch add support for IGEP COM AQUILA products, and the
second patch add support for the development board.

These patches apply on top of bcousson/for_3.12/dts repository.

Changes since v2:
   * Make it compatible with "isee,am335x-base0033", "isee,am335x-igep0033",
     "ti,am33xx" since these boards are manufactured by ISEE not TI. (Javier)
Changes since v1:
   * Use &node to reference the nodes already defined in dtsi files. (Javier)

Best regards,

Enric Balletbo i Serra (2):
   ARM: dts: AM33XX: Add support for IGEP COM AQUILA
   ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board.

  arch/arm/boot/dts/Makefile             |   1 +
  arch/arm/boot/dts/am335x-base0033.dts  |  16 ++
  arch/arm/boot/dts/am335x-igep0033.dtsi | 265 +++++++++++++++++++++++++++++++++
  3 files changed, 282 insertions(+)
  create mode 100644 arch/arm/boot/dts/am335x-base0033.dts
  create mode 100644 arch/arm/boot/dts/am335x-igep0033.dtsi

--
1.8.1.2


Hi Benoit and Tony,

Any comments on this series? I had already reviewed previous versions
of the DT and it looks good to me now.

It would be great if this can make it for 3.13.

Looks good to me, I would assume Benoit will be looking at this
shortly.

I did :-)

It looks good to me too, I've just fixed a conflict with my current branch in the Makefile and fix a typo in the header:

+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -0,0 +1,16 @@
+/*
+ * am335x-base0033.dtsi - Device Tree file for IGEP AQUILA EXPANSION

Should be am335x-base0033.dts. I fixed it for you. Please check if the fix is ok in the branch.

Pushed on my for_3.13/dts branch.

Thanks,
Benoit

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to