Hi Balaji,
On 27/09/2013 13:35, Balaji T K wrote:
pinmux_emmc_pins: mux mode for cmd line should be MODE2
to detect eMMC on beagle bone black and beagle bone white + eMMC cape.
Signed-off-by: Balaji T K <[email protected]>
Tested-by: Felipe Balbi <[email protected]>
---
based on
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.13/dts
arch/arm/boot/dts/am335x-bone-common.dtsi | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi
b/arch/arm/boot/dts/am335x-bone-common.dtsi
index ff5c3ca..51f6a99 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -153,7 +153,7 @@
emmc_pins: pinmux_emmc_pins {
pinctrl-single,pins = <
0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /*
gpmc_csn1.mmc1_clk */
- 0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /*
gpmc_csn2.mmc1_cmd */
+ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /*
gpmc_csn2.mmc1_cmd */
0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /*
gpmc_ad0.mmc1_dat0 */
0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /*
gpmc_ad1.mmc1_dat1 */
0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /*
gpmc_ad2.mmc1_dat2 */
Thanks, I'll apply it for 3.13.
Regards,
Benoit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
