Commit ad871c10b ("ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards")
added USB OTG support for most OMAP boards but some OMAP3 boards
such as IGEP boards were not updated. This patch adds an USB OTG
device node to these board.Signed-off-by: Javier Martinez Canillas <[email protected]> Tested-by: Enric Balletbo i Serra <[email protected]> --- Changes since v1: - Add USB OTG support for both IGEPv2 and IGEP COM and not only to IGEPv2 arch/arm/boot/dts/omap3-igep.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 0f92224..4e2eda2 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -143,3 +143,10 @@ &twl_gpio { ti,use-leds; }; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + mode = <3>; + power = <50>; +}; -- 1.8.4.rc3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
