On 10/07/2013 06:12 PM, Javier Martinez Canillas wrote:
> Commit ad871c10b ("ARM: dts: OMAP: Add usb_otg and glue data to O
> added USB OTG support for most OMAP boards but some OMAP3 boards
> such as IGEP boards were not updated. This patch adds an USB OTG
> device node to these board.
>
> Signed-off-by: Javier Martinez Canillas <[email protected]>
> Tested-by: Enric Balletbo i Serra <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
> ---
>
> Changes since v2:
> - Add phys and phy-names properties as required by the new
> generic PHY framework; suggested by Roger Quadros
>
> Changes since v1:
> - Add USB OTG support for both IGEPv2 and IGEP COM and not only to IGEPv2
>
> arch/arm/boot/dts/omap3-igep.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-igep.dtsi
> b/arch/arm/boot/dts/omap3-igep.dtsi
> index 0f92224..ba1e58b 100644
> --- a/arch/arm/boot/dts/omap3-igep.dtsi
> +++ b/arch/arm/boot/dts/omap3-igep.dtsi
> @@ -143,3 +143,12 @@
> &twl_gpio {
> ti,use-leds;
> };
> +
> +&usb_otg_hs {
> + interface-type = <0>;
> + usb-phy = <&usb2_phy>;
> + phys = <&usb2_phy>;
> + phy-names = "usb2-phy";
> + mode = <3>;
> + power = <50>;
> +};
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
