HwSpinlock IP is present only on OMAP4 and other newer SoCs,
which are all device-tree boot only. This patch adds the
base support for parsing the DT nodes, and removes the code
dealing with the traditional platform device instantiation.

Signed-off-by: Suman Anna <s-a...@ti.com>
---
 .../devicetree/bindings/hwlock/omap-hwspinlock.txt | 19 +++++++
 arch/arm/mach-omap2/Makefile                       |  3 --
 arch/arm/mach-omap2/hwspinlock.c                   | 60 ----------------------
 drivers/hwspinlock/omap_hwspinlock.c               | 17 ++++--
 4 files changed, 32 insertions(+), 67 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
 delete mode 100644 arch/arm/mach-omap2/hwspinlock.c

diff --git a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt 
b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
new file mode 100644
index 0000000..8eb6965
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt
@@ -0,0 +1,19 @@
+OMAP4+ HwSpinlock Driver
+========================
+
+Required properties:
+- compatible:          Should be "ti,omap4-hwspinlock" for
+                           OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs
+- reg:                 Contains the hwspinlock module register address space
+                       (base address and length)
+- ti,hwmods:           Name of the hwmod associated with the hwspinlock device
+
+
+Example:
+
+/* OMAP4 */
+hwspinlock: spinlock@4a0f6000 {
+       compatible = "ti,omap4-hwspinlock";
+       reg = <0x4a0f6000 0x1000>;
+       ti,hwmods = "spinlock";
+};
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 020079e..a2312f2 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -297,9 +297,6 @@ obj-y                                       += $(smc91x-m) 
$(smc91x-y)
 
 smsc911x-$(CONFIG_SMSC911X)            := gpmc-smsc911x.o
 obj-y                                  += $(smsc911x-m) $(smsc911x-y)
-ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
-obj-y                                  += hwspinlock.o
-endif
 
 emac-$(CONFIG_TI_DAVINCI_EMAC)         := am35xx-emac.o
 obj-y                                  += $(emac-m) $(emac-y)
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
deleted file mode 100644
index ef175ac..0000000
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * OMAP hardware spinlock device initialization
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
- *
- * Contact: Simon Que <s...@ti.com>
- *          Hari Kanigeri <h-kanige...@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/hwspinlock.h>
-
-#include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-
-static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
-       .base_id = 0,
-};
-
-static int __init hwspinlocks_init(void)
-{
-       int retval = 0;
-       struct omap_hwmod *oh;
-       struct platform_device *pdev;
-       const char *oh_name = "spinlock";
-       const char *dev_name = "omap_hwspinlock";
-
-       /*
-        * Hwmod lookup will fail in case our platform doesn't support the
-        * hardware spinlock module, so it is safe to run this initcall
-        * on all omaps
-        */
-       oh = omap_hwmod_lookup(oh_name);
-       if (oh == NULL)
-               return -EINVAL;
-
-       pdev = omap_device_build(dev_name, 0, oh, &omap_hwspinlock_pdata,
-                               sizeof(struct hwspinlock_pdata));
-       if (IS_ERR(pdev)) {
-               pr_err("Can't build omap_device for %s:%s\n", dev_name,
-                                                               oh_name);
-               retval = PTR_ERR(pdev);
-       }
-
-       return retval;
-}
-/* early board code might need to reserve specific hwspinlock instances */
-omap_postcore_initcall(hwspinlocks_init);
diff --git a/drivers/hwspinlock/omap_hwspinlock.c 
b/drivers/hwspinlock/omap_hwspinlock.c
index 292869c..349c5aa 100644
--- a/drivers/hwspinlock/omap_hwspinlock.c
+++ b/drivers/hwspinlock/omap_hwspinlock.c
@@ -1,7 +1,7 @@
 /*
  * OMAP hardware spinlock driver
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2010-2013 Texas Instruments Incorporated - http://www.ti.com
  *
  * Contact: Simon Que <s...@ti.com>
  *          Hari Kanigeri <h-kanige...@ti.com>
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/hwspinlock.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 
 #include "hwspinlock_internal.h"
@@ -80,14 +81,15 @@ static const struct hwspinlock_ops omap_hwspinlock_ops = {
 
 static int omap_hwspinlock_probe(struct platform_device *pdev)
 {
-       struct hwspinlock_pdata *pdata = pdev->dev.platform_data;
+       struct device_node *node = pdev->dev.of_node;
        struct hwspinlock_device *bank;
        struct hwspinlock *hwlock;
        struct resource *res;
        void __iomem *io_base;
        int num_locks, i, ret;
+       int base_id = 0;
 
-       if (!pdata)
+       if (!node)
                return -ENODEV;
 
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -128,7 +130,7 @@ static int omap_hwspinlock_probe(struct platform_device 
*pdev)
        pm_runtime_enable(&pdev->dev);
 
        ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
-                                               pdata->base_id, num_locks);
+                                               base_id, num_locks);
        if (ret)
                goto reg_fail;
 
@@ -161,12 +163,19 @@ static int omap_hwspinlock_remove(struct platform_device 
*pdev)
        return 0;
 }
 
+static const struct of_device_id omap_hwspinlock_of_match[] = {
+       { .compatible = "ti,omap4-hwspinlock", },
+       { /* end */ },
+};
+MODULE_DEVICE_TABLE(of, omap_hwspinlock_of_match);
+
 static struct platform_driver omap_hwspinlock_driver = {
        .probe          = omap_hwspinlock_probe,
        .remove         = omap_hwspinlock_remove,
        .driver         = {
                .name   = "omap_hwspinlock",
                .owner  = THIS_MODULE,
+               .of_match_table = omap_hwspinlock_of_match,
        },
 };
 
-- 
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to