* Pekon Gupta <[email protected]> [131015 11:29]: > Legacy OMAP SoC like OMAP2xxx, OMAP3xxx do not have in-build ELM h/w engine, > so they cannot support h/w based BCH ECC error-detection. Thus, > gpmc_hwecc_bch_capable() check was added in following commit to find-out > which SoC have in-built ELM h/w to support hardware based ecc-correction. > > commit 3852ccd66a9bcb2aa6f46bce5442b6d8d08e5b5d > Author: Afzal Mohammed <[email protected]> > AuthorDate: 2012-10-01 > > But with DT based kernel, presence of ELM h/w engine on SoC is parsed from DT > data part of .dtsi file, which is unique for each device. Hence hard-coded > check for each device can be dropped.
I don't think we can queue this yet as omap3 is not yet DT only? Regards, Tony > Signed-off-by: Pekon Gupta <[email protected]> > --- > arch/arm/mach-omap2/gpmc-nand.c | 25 ------------------------- > 1 file changed, 25 deletions(-) > > diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c > index 662c7fd..2b03eba 100644 > --- a/arch/arm/mach-omap2/gpmc-nand.c > +++ b/arch/arm/mach-omap2/gpmc-nand.c > @@ -43,28 +43,6 @@ static struct platform_device gpmc_nand_device = { > .resource = gpmc_nand_resource, > }; > > -static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) > -{ > - /* support only OMAP3 class */ > - if (!cpu_is_omap34xx() && !soc_is_am33xx()) { > - pr_err("BCH ecc is not supported on this CPU\n"); > - return 0; > - } > - > - /* > - * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1 > - * and AM33xx derivates. Other chips may be added if confirmed to work. > - */ > - if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) && > - (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)) && > - (!soc_is_am33xx())) { > - pr_err("BCH 4-bit mode is not supported on this CPU\n"); > - return 0; > - } > - > - return 1; > -} > - > int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, > struct gpmc_timings *gpmc_t) > { > @@ -127,9 +105,6 @@ int gpmc_nand_init(struct omap_nand_platform_data > *gpmc_nand_data, > > gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); > > - if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) > - return -EINVAL; > - > err = platform_device_register(&gpmc_nand_device); > if (err < 0) { > dev_err(dev, "Unable to register NAND device\n"); > -- > 1.8.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
