From: Victor Kamensky <victor.kamen...@linaro.org>
All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.
Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.
Signed-off-by: Victor Kamensky <victor.kamen...@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondrat...@linaro.org>
---
drivers/i2c/busses/i2c-omap.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 9967a6f..d69826e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -266,13 +266,13 @@ static const u8 reg_map_ip_v2[] = {
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
int reg, u16 val)
{
- __raw_writew(val, i2c_dev->base +
+ writew_relaxed(val, i2c_dev->base +
(i2c_dev->regs[reg] << i2c_dev->reg_shift));
}
static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
{
- return __raw_readw(i2c_dev->base +
+ return readw_relaxed(i2c_dev->base +
(i2c_dev->regs[reg] << i2c_dev->reg_shift));
}
@@ -1142,7 +1142,7 @@ omap_i2c_probe(struct platform_device *pdev)
* Also since the omap_i2c_read_reg uses reg_map_ip_* a
* raw_readw is done.
*/
- rev = __raw_readw(dev->base + 0x04);
+ rev = readw_relaxed(dev->base + 0x04);
dev->scheme = OMAP_I2C_SCHEME(rev);
switch (dev->scheme) {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
