This is all omap4 specific, which is device tree based
nowadays and should use pinctrl-single instead.
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
arch/arm/mach-omap2/display.c | 78 -------------------------------------------
1 file changed, 78 deletions(-)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index a4e536b..58347bb 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -32,7 +32,6 @@
#include "soc.h"
#include "iomap.h"
-#include "mux.h"
#include "control.h"
#include "display.h"
#include "prm.h"
@@ -102,90 +101,13 @@ static const struct omap_dss_hwmod_data
omap4_dss_hwmod_data[] __initconst = {
{ "dss_hdmi", "omapdss_hdmi", -1 },
};
-static void __init omap4_tpd12s015_mux_pads(void)
-{
- omap_mux_init_signal("hdmi_cec",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_scl",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_sda",
- OMAP_PIN_INPUT_PULLUP);
-}
-
-static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
-{
- u32 reg;
- u16 control_i2c_1;
-
- /*
- * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
- * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable
- * internal pull up resistor.
- */
- if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) {
- control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1;
- reg = omap4_ctrl_pad_readl(control_i2c_1);
- reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK |
- OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK);
- omap4_ctrl_pad_writel(reg, control_i2c_1);
- }
-}
-
-static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
-{
- u32 enable_mask, enable_shift;
- u32 pipd_mask, pipd_shift;
- u32 reg;
-
- if (dsi_id == 0) {
- enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
- enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
- pipd_mask = OMAP4_DSI1_PIPD_MASK;
- pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
- } else if (dsi_id == 1) {
- enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
- enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
- pipd_mask = OMAP4_DSI2_PIPD_MASK;
- pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
- } else {
- return -ENODEV;
- }
-
- reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
- reg &= ~enable_mask;
- reg &= ~pipd_mask;
-
- reg |= (lanes << enable_shift) & enable_mask;
- reg |= (lanes << pipd_shift) & pipd_mask;
-
- omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
- return 0;
-}
-
-int __init omap_hdmi_init(enum omap_hdmi_flags flags)
-{
- if (cpu_is_omap44xx()) {
- omap4_hdmi_mux_pads(flags);
- omap4_tpd12s015_mux_pads();
- }
-
- return 0;
-}
-
static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
{
- if (cpu_is_omap44xx())
- return omap4_dsi_mux_pads(dsi_id, lane_mask);
-
return 0;
}
static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
{
- if (cpu_is_omap44xx())
- omap4_dsi_mux_pads(dsi_id, 0);
}
static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)
--
1.8.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
