Hi,
On Wed, Dec 26, 2007 at 05:31:51PM +0000, rubisher wrote:
> Hello Grant,
>
> I suspecting a possible issue with this hack in your iommu_fill_pdir():
>
> you initialized dma_sg with the adress of startsg (/* pointer to current
> DMA */)
> then before the loop you dma_sg--;
Yes. The comment before that line explains why it does that.
...
> Now in the while (nents-- > 0), suppose the test "if
> (sg_dma_address(startsg) & PIDE_FLAG) {" failed,
Do you have any evidence this test has failed when dma_sg is pointing
at garbage?
While possible, that would be a bug in iommu_coalesce_chunks()
for not setting PIDE_FLAG.
> so later in the loop the "sg_dma_len(dma_sg) += startsg->length" (which is
> actually "dma_sg->iova_length += startsg->length" ) imo could corrupt
> something?
Yes, that would be the result. Can you try a bug catcher to prove
that's something is actually getting corrupted?
Add something like the following around line 65 (before "sg_dma_len(dma_sg)"
is assigned):
BUG_ON(dma_sg < startsg);
On the same note, line 44 is clearly wrong:
41 if (sg_dma_address(startsg) & PIDE_FLAG) {
42 u32 pide = sg_dma_address(startsg) & ~PIDE_FLAG;
43
44 BUG_ON(pdirp && (dma_len != sg_dma_len(dma_sg)));
45
46 dma_sg++;
The BUG_ON at line 44 might fail when it shouldn't (and vice versa).
My preference is to remove it or put "#ifdef DEBUG_IOMMU" around
that line of code (not literally, but effectively).
In general, I didn't like the "pre-decrement" but it seems to work and
makes the code a bit more efficient. Efficiency is extremely important
for this code since it gets called so often. Small changes can have
easily measured impact.
> That said I tried to re-use the first implementation of jejb (what was in
> ccio-dma.c before this patch
> <http://cvs.parisc-linux.org/linux-2.6/drivers/parisc/ccio-dma.c?r1=1.12&r2=1.13>
>
> but that doesn't seems to fix the ccio-dma issue at all: I can still read
> those kind of message at the console while doing such copy
> [snip]
> scsi1: (4:0) phase mismatch at 01e8, phase IO CD MSG BSY REQ MSG IN
> scsi1: Bus Reset detected, executing command 10953600, slot 109708a4, dsp
> 001301e8[01e8]
I'm thinking we really need SCSI bus traces to figure out if the SCSI driver
is doing the right thing and if not, exactly what is it doing.
If it is a CCIO bug, my guess is it's more likely to be problems with
setting magic bits. We really need the ERS to review register settings.
..
> (the scsi1 is the lasi scsi hba as sources and the target being the disks
> on ncr53c720 hba)
>
> or experimenting fs issues on this target disks?
I doubt this is a file system problem.
> That said ok I will wait either U2/Uturn ers public doc or all volonteers
> feedback.
I'm skeptical for the former and hopeful for the latter.
There is a chance Linux Foundation could ask HP for those docs under NDA.
But you need to sign up with Linux Foundataion as a developer and
then request HP for those docs.
cheers,
grant
-
To unsubscribe from this list: send the line "unsubscribe linux-parisc" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
