On Sat, Aug 12, 2006 at 11:12:00AM +0200, Jan T?njes wrote: > Am Samstag 12 August 2006 10:23 schrieb Russell King: > > On Sat, Aug 12, 2006 at 02:24:03AM +0200, Jan T?njes wrote: > > > i am using gentoo linux kernel 2.6.17-gentoo-r4, i have pcmciautils v. > > > 0.14 installed and everything is ok, but when i insert my card it tells > > > me: > > > > > > Aug 12 02:15:26 alitoh pccard: PCMCIA card inserted into slot 0 > > > Aug 12 02:15:26 alitoh pcmcia: registering new device pcmcia0.0 > > > Aug 12 02:15:27 alitoh serial_cs: serial8250_register_port() at 0x03e8, > > > irq 10 failed > > > > Please do: cat /proc/tty/driver/serial and send the output. > > Good Morning! :-) > > alitoh pcmcia # cat /proc/tty/driver/serial > serinfo:1.0 driver revision: > 0: uart:8250 port:00008828 irq:5 tx:0 rx:0 > 1: uart:8250 port:00008840 irq:5 tx:0 rx:0 > 2: uart:8250 port:00008850 irq:5 tx:0 rx:0 > 3: uart:8250 port:00008860 irq:5 tx:0 rx:0 > alitoh pcmcia # > > ;-) There seems to be the Problem. What can I do "against" it?
You appear to have no free uart slots. Try booting with 8250.nr_uarts=8 if 8250 is built-in, or loading the 8250 module with nr_uarts=8. -- Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: 2.6 Serial core _______________________________________________ Linux PCMCIA reimplementation list http://lists.infradead.org/mailman/listinfo/linux-pcmcia
