From: David Brownell <[EMAIL PROTECTED]>
Date: Sat, 1 Jul 2006 13:39:55 -0700
Subject: [PATCH] pcmcia: at91_cf update
More correct AT91 CF wakeup logic ... only enable/disable the IRQ wakeup
capability, not the IRQ itself. That way the we know that the IRQ will be
disabled correctly, in suspend/resume logic instead of ARM IRQ code.
Most of the pin multiplexing setup has moved to the devices.c setup code.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Andrew Victor <[EMAIL PROTECTED]>
Signed-off-by: Dominik Brodowski <[EMAIL PROTECTED]>
---
drivers/pcmcia/at91_cf.c | 25 +++++++------------------
1 files changed, 7 insertions(+), 18 deletions(-)
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 7f5df9a..f8db6e3 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -241,12 +241,6 @@ static int __init at91_cf_probe(struct p
csa = at91_sys_read(AT91_EBI_CSA);
at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
- /* force poweron defaults for these pins ... */
- (void) at91_set_A_periph(AT91_PIN_PC9, 0); /* A25/CFRNW */
- (void) at91_set_A_periph(AT91_PIN_PC10, 0); /* NCS4/CFCS */
- (void) at91_set_A_periph(AT91_PIN_PC11, 0); /* NCS5/CFCE1 */
- (void) at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */
-
/* nWAIT is _not_ a default setting */
(void) at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */
@@ -322,6 +316,7 @@ fail1:
if (board->irq_pin)
free_irq(board->irq_pin, cf);
fail0a:
+ device_init_wakeup(&pdev->dev, 0);
free_irq(board->det_pin, cf);
device_init_wakeup(&pdev->dev, 0);
fail0:
@@ -360,26 +355,20 @@ static int at91_cf_suspend(struct platfo
struct at91_cf_data *board = cf->board;
pcmcia_socket_dev_suspend(&pdev->dev, mesg);
- if (device_may_wakeup(&pdev->dev))
+ if (device_may_wakeup(&pdev->dev)) {
enable_irq_wake(board->det_pin);
- else {
+ if (board->irq_pin)
+ enable_irq_wake(board->irq_pin);
+ } else {
disable_irq_wake(board->det_pin);
- disable_irq(board->det_pin);
+ if (board->irq_pin)
+ disable_irq_wake(board->irq_pin);
}
- if (board->irq_pin)
- disable_irq(board->irq_pin);
return 0;
}
static int at91_cf_resume(struct platform_device *pdev)
{
- struct at91_cf_socket *cf = platform_get_drvdata(pdev);
- struct at91_cf_data *board = cf->board;
-
- if (board->irq_pin)
- enable_irq(board->irq_pin);
- if (!device_may_wakeup(&pdev->dev))
- enable_irq(board->det_pin);
pcmcia_socket_dev_resume(&pdev->dev);
return 0;
}
--
1.4.3
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
