Hi I'm running xubuntu feisty on a powerbook G3. I've been trying to get a wireless pcmcia NIC to work - but to no avail:
[ 196.111372] pccard: PCMCIA card inserted into slot 0 [ 196.111407] cs: memory probe 0x80000000-0xfcffffff: excluding 0x80000000-0x81 ffffff [ 196.230699] cs: memory probe 0xfd000000-0xfdffffff:Machine check in kernel mo de. [ 196.230784] Caused by (from SRR1=49030): Transfer error ack signal [ 196.231010] Oops: Machine check, sig: 7 [#1] I have found a similar problem in the list in this thread: http://lists.infradead.org/pipermail/linux-pcmcia/2006-April/003487.html Following that post I added a kernel parameter: [ 0.000000] Kernel command line: root=/dev/hda3 ro reserve=0xfd000000,0xfffff f but still the same error occurs. Where did I go wrong? I've added a bunch of useful stuff such as dmesg (the card was inserted after starting up, the error message is right at the end). Thanks in advance! Batist Linux powerbookG3 2.6.20-15-powerpc #3 Sun Apr 15 06:45:49 UTC 2007 ppc GNU/Linux dmesg [ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 192MB; using 512kB for hash table (at cbf80000) [ 0.000000] Linux version 2.6.20-15-powerpc ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #3 Sun Apr 15 06:45:49 UTC 2007 (Ubuntu 2.6.20-15.27-powerpc) [ 0.000000] Found initrd at 0xc1900000:0xc204b400 [ 0.000000] Found a Paddington mac-io controller, rev: 0, mapped at 0xfdf80000 [ 0.000000] PowerMac motherboard: PowerBook 101 (Lombard) [ 0.000000] PMU driver v2 initialized for 1999 PowerBook G3, firmware: 0b [ 0.000000] Entering add_active_range(0, 0, 49152) 0 entries of 256 used [ 0.000000] Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->0 [ 0.000000] nvram: OF partition at 0x140 [ 0.000000] nvram: XP partition at 0xffffffff [ 0.000000] nvram: NR partition at 0xffffffff [ 0.000000] Top of RAM: 0xc000000, Total RAM: 0xc000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 49152 [ 0.000000] Normal 49152 -> 49152 [ 0.000000] HighMem 49152 -> 49152 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 49152 [ 0.000000] On node 0 totalpages: 49152 [ 0.000000] DMA zone: 384 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 48768 pages, LIFO batch:15 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Built 1 zonelists. Total pages: 48768 [ 0.000000] Kernel command line: root=/dev/hda3 ro reserve=0xfd000000,0xffffff [ 0.000000] irq: Found primary Apple PIC /[EMAIL PROTECTED]/[EMAIL PROTECTED] for 64 irqs [ 0.000000] irq: System has 64 possible interrupts [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: on [ 0.000000] time_init: decrementer frequency = 16.703983 MHz [ 0.000000] time_init: processor frequency = 399.999996 MHz [ 26.038132] Console: colour dummy device 80x25 [ 26.039439] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 26.040476] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 26.067581] High memory: 0k [ 26.067598] Memory: 182528k/196608k available (3220k kernel code, 13744k reserved, 120k data, 293k bss, 188k init) [ 26.068022] Calibrating delay loop... 33.28 BogoMIPS (lpj=66560) [ 26.149873] Security Framework v1.0.0 initialized [ 26.149926] SELinux: Disabled at boot. [ 26.149995] Mount-cache hash table entries: 512 [ 26.150644] device-tree: Duplicate name in /cpus/PowerPC,[EMAIL PROTECTED], renamed to "l2-cache#1" [ 26.153881] NET: Registered protocol family 16 [ 26.154549] PMU i2c /[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] [ 26.154580] channel 1 bus <multibus> [ 26.154598] channel 2 bus <multibus> [ 26.154738] PCI: Probing PCI hardware [ 26.156754] PCI: Cannot allocate resource region 1 of device 0000:00:11.0 [ 26.156849] Registering pmac pic with sysfs... [ 26.160793] NET: Registered protocol family 8 [ 26.160822] NET: Registered protocol family 20 [ 26.162213] NET: Registered protocol family 2 [ 26.197932] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 26.198294] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 26.198541] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 26.198687] TCP: Hash tables configured (established 8192 bind 4096) [ 26.198709] TCP reno registered [ 26.210210] checking if image is initramfs... it is [ 28.615371] Freeing initrd memory: 7469k freed [ 28.617004] Thermal assist unit using timers, shrink_timer: 500 jiffies [ 28.618494] audit: initializing netlink socket (disabled) [ 28.618585] audit(1176920167.580:1): initialized [ 28.619082] VFS: Disk quotas dquot_6.5.1 [ 28.619208] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 28.619506] io scheduler noop registered [ 28.619534] io scheduler anticipatory registered [ 28.619554] io scheduler deadline registered [ 28.619597] io scheduler cfq registered (default) [ 28.620652] PCI: Enabling device 0000:00:11.0 (0086 -> 0087) [ 28.620713] atyfb: using auxiliary register aperture [ 28.621346] atyfb: 3D RAGE LT PRO (Mach64 LI, PCI) [0x4c49 rev 0xdc] [ 28.621407] atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK, 100 MHz XCLK [ 28.621989] atyfb: monitor sense=62b, mode 6 [ 28.685979] Console: switching to colour frame buffer device 128x48 [ 28.705901] atyfb: fb0: ATY Mach64 frame buffer device on PCI [ 28.857512] Generic RTC Driver v1.07 [ 28.857997] Macintosh non-volatile memory driver v1.1 [ 28.858614] mice: PS/2 mouse device common for all mice [ 28.861517] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 28.862592] MacIO PCI driver attached to Paddington chipset [ 28.863931] Can't request resource 0 for MacIO device 0.00000000:power-mg [ 28.867185] mediabay0: Registered Heathrow media-bay [ 28.867418] mediabay0: powering down [ 29.101680] mediabay0: switching to 3 [ 29.101837] mediabay0: powering up [ 29.325678] mediabay0: enabling (kind:3) [ 29.389674] mediabay0: waiting reset (kind:3) [ 29.517671] mediabay0: waiting IDE reset (kind:3) [ 30.669655] mediabay0: waiting IDE ready (kind:3) [ 30.701654] mediabay0: up before IDE init [ 30.702187] input: Macintosh mouse button emulation as /class/input/input0 [ 30.703214] pmubl: Backlight initialized (pmubl) [ 30.703626] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 30.703892] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 30.704483] adb: starting probe task... [ 31.721652] ide0: Found Apple Heathrow ATA controller, bus ID 0, irq 20 [ 31.721971] Probing IDE interface ide0... [ 32.177837] hda: TOSHIBA MK6409MAV, ATA DISK drive [ 32.831125] adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f [ 32.856981] ADB keyboard at 2, handler 1 [ 32.866098] Detected ADB keyboard, type ANSI. [ 32.875370] input: ADB keyboard as /class/input/input1 [ 32.884642] input: ADB Powerbook buttons as /class/input/input2 [ 32.893677] hda: Enabling MultiWord DMA 2 [ 32.903665] ide0 at 0xcd012000-0xcd012007,0xcd012160 on irq 20 [ 32.913237] Registered ide1 for media bay 0 [ 32.913258] ide1: Found Apple Heathrow ATA controller, bus ID 1 (mediabay), irq 31 [ 32.922617] Probing IDE interface ide1... [ 32.931262] ADB mouse at 3, handler set to 4 (trackpad) [ 32.994257] input: ADB mouse as /class/input/input3 [ 33.003443] adb: finished probe task... [ 33.401806] hdc: MATSHITADVD-ROM SR-8171, ATAPI CD/DVD-ROM drive [ 33.745621] hdc: Enabling MultiWord DMA 2 [ 33.755698] ide1 at 0xcd018000-0xcd018007,0xcd018160 on irq 31 [ 33.765412] PowerMac i2c bus pmu 2 registered [ 33.774661] PowerMac i2c bus pmu 1 registered [ 33.784043] TCP cubic registered [ 33.793047] NET: Registered protocol family 1 [ 33.802270] Freeing unused kernel memory: 188k init [ 34.664163] Capability LSM initialized [ 38.447109] usbcore: registered new interface driver usbfs [ 38.447589] usbcore: registered new interface driver hub [ 38.447958] usbcore: registered new device driver usb [ 38.454521] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 38.454718] ohci_hcd 0000:00:0e.0: OHCI Host Controller [ 38.455604] ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 1 [ 38.456008] ohci_hcd 0000:00:0e.0: irq 28, io mem 0x80882000 [ 38.639470] usb usb1: configuration #1 chosen from 1 choice [ 38.639953] hub 1-0:1.0: USB hub found [ 38.640203] hub 1-0:1.0: 2 ports detected [ 39.237886] SCSI subsystem initialized [ 39.245662] mesh: configured for synchronous 5 MB/s [ 39.449782] mesh: performing initial bus reset... [ 39.844696] hda: max request size: 128KiB [ 40.042244] hda: 12685680 sectors (6495 MB), CHS=13424/15/63, (U)DMA [ 40.042711] hda: cache flushes not supported [ 40.043104] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 [ 40.203217] hdc: ATAPI 20X DVD-ROM drive, 512kB Cache, DMA [ 40.203702] Uniform CD-ROM driver Revision: 3.20 [ 41.374431] Attempting manual resume [ 41.548016] kjournald starting. Commit interval 5 seconds [ 41.548450] EXT3-fs: mounted filesystem with ordered data mode. [ 43.453569] scsi0 : MESH [ 44.003875] eth0: BMAC+ at 00:50:e4:7a:47:51 [ 49.460579] phy registers: [ 49.460599] 0800 7849 2000 5c10 01e1 41e1 0007 2801 [ 49.470965] 0000 0000 0000 0000 0000 0000 0000 0000 [ 49.481324] 2002 0000 0000 0000 0001 0000 0020 0000 [ 49.491685] 0000 0000 0180 0100 0006 0f00 0000 0000 [ 54.134269] NET: Registered protocol family 17 [ 57.029251] PCI: Enabling device 0000:00:13.0 (0000 -> 0002) [ 57.029720] Yenta: CardBus bridge found at 0000:00:13.0 [0000:0000] [ 57.030038] PCI: Bus 1, cardbus bridge: 0000:00:13.0 [ 57.030265] IO window: 00001400-000015ff [ 57.030459] IO window: 00001800-000019ff [ 57.030653] PREFETCH window: 80000000-803fffff [ 57.030867] MEM window: 80400000-807fffff [ 57.031066] Yenta: Enabling burst memory read transactions [ 57.031312] Yenta: Using CSCINT to route CSC interrupts to PCI [ 57.031567] Yenta: Routing CardBus interrupts to PCI [ 57.031791] Yenta TI: socket 0000:00:13.0, mfunc 0x00000002, devctl 0x60 [ 57.133371] Yenta: ISA IRQ mask 0x0000, PCI irq 22 [ 57.133697] Socket status: 30000006 [ 57.133871] pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff [ 57.134140] pcmcia: parent PCI bridge Memory window: 0x80000000 - 0xfcffffff [ 57.134443] pcmcia: parent PCI bridge Memory window: 0xfd000000 - 0xfdffffff [ 62.931940] pmac_zilog: 0.6 (Benjamin Herrenschmidt <[EMAIL PROTECTED]>) [ 62.939055] pmac_zilog: serial modem detected [ 62.939539] ttyS0 at MMIO 0x80813020 (irq = 35) is a Z85c30 ESCC - Internal modem [ 62.948488] ttyS1 at MMIO 0x80813000 (irq = 38) is a Z85c30 ESCC - Infrared port [ 63.519859] apm_emu: APM Emulation 0.5 initialized. [ 66.254320] input: PowerMac Beep as /class/input/input4 [ 67.170934] Adding 351552k swap on /dev/disk/by-uuid/5de2f7e0-bb6e-49cc-b4c6-6e2fc4b74459. Priority:-1 extents:1 across:351552k [ 67.564338] EXT3 FS on hda3, internal journal [ 68.528530] kjournald starting. Commit interval 5 seconds [ 68.529919] EXT3 FS on hda8, internal journal [ 68.529942] EXT3-fs: mounted filesystem with ordered data mode. [ 68.563591] kjournald starting. Commit interval 5 seconds [ 68.564666] EXT3 FS on hda7, internal journal [ 68.564689] EXT3-fs: mounted filesystem with ordered data mode. [ 68.626515] kjournald starting. Commit interval 5 seconds [ 68.627792] EXT3 FS on hda4, internal journal [ 68.627813] EXT3-fs: mounted filesystem with ordered data mode. [ 68.669914] kjournald starting. Commit interval 5 seconds [ 68.694117] EXT3 FS on hda5, internal journal [ 68.694140] EXT3-fs: mounted filesystem with ordered data mode. [ 103.388928] lp: driver loaded but no devices found [ 106.150040] ppdev: user-space parallel port driver [ 196.111372] pccard: PCMCIA card inserted into slot 0 [ 196.111407] cs: memory probe 0x80000000-0xfcffffff: excluding 0x80000000-0x81ffffff [ 196.230699] cs: memory probe 0xfd000000-0xfdffffff:Machine check in kernel mode. [ 196.230784] Caused by (from SRR1=49030): Transfer error ack signal [ 196.231010] Oops: Machine check, sig: 7 [#1] [ 196.231316] [ 196.231408] Modules linked in: ppdev lp parport cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand cpufreq_conservative snd_powermac snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc apm_emu pmac_zilog serial_core pcmcia yenta_socket rsrc_nonstatic pcmcia_core af_packet tsdev evdev ext3 jbd mbcache ide_cd cdrom ide_disk bmac mesh scsi_mod ohci_hcd usbcore capability commoncap [ 196.234132] NIP: CD8ECD18 LR: CD8ECCEC CTR: C0014B88 [ 196.234360] REGS: cbe27c80 TRAP: 0200 Not tainted (2.6.20-15-powerpc) [ 196.234646] MSR: 00049030 <EE,ME,IR,DR> CR: 82004024 XER: 00000000 [ 196.235026] TASK = c1f15870[3057] 'pccardd' THREAD: cbe26000 [ 196.235248] GPR00: 000000FF CBE27D30 C1F15870 CD990000 CD8A8014 00000070 00000002 CBE27D89 [ 196.235721] GPR08: CD8A8040 00001000 CD990000 CD991000 22000022 00000000 00000000 FD000000 [ 196.236194] GPR16: CD880000 FD100000 FE000000 FD000000 00200000 CB8A1428 FD080000 000004FB [ 196.236668] GPR24: CBE27D89 00000000 00000002 CB8A1428 00000021 00000000 00000002 CBE27D89 [ 196.237172] NIP [CD8ECD18] pcmcia_read_cis_mem+0x178/0x26c [pcmcia_core] [ 196.237540] LR [CD8ECCEC] pcmcia_read_cis_mem+0x14c/0x26c [pcmcia_core] [ 196.237854] Call Trace: [ 196.237984] [CBE27D30] [CD8ECCEC] pcmcia_read_cis_mem+0x14c/0x26c [pcmcia_core] (unreliable) [ 196.238390] [CBE27D60] [CD8ECF74] read_cis_cache+0x168/0x16c [pcmcia_core] [ 196.238721] [CBE27D80] [CD8ED1CC] pccard_get_next_tuple+0x1b0/0x480 [pcmcia_core] [ 196.239076] [CBE27DC0] [CD8ED534] pccard_get_first_tuple+0x98/0x144 [pcmcia_core] [ 196.239431] [CBE27DF0] [CD8EDB84] pccard_validate_cis+0xa0/0x230 [pcmcia_core] [ 196.239775] [CBE27E20] [CD881EBC] readable+0x54/0xd8 [rsrc_nonstatic] [ 196.240094] [CBE27E40] [CD8821E8] pcmcia_nonstatic_validate_mem+0x16c/0x408 [rsrc_nonstatic] [ 196.240475] [CBE27EC0] [CD8EDD3C] pcmcia_validate_mem+0x28/0x40 [pcmcia_core] [ 196.240817] [CBE27ED0] [CD9227FC] pcmcia_card_add+0x40/0xd0 [pcmcia] [ 196.241157] [CBE27F40] [CD922934] ds_event+0xa8/0xd4 [pcmcia] [ 196.241443] [CBE27F60] [CD8EA4F8] send_event+0x6c/0x94 [pcmcia_core] [ 196.241757] [CBE27F70] [CD8EAA98] socket_insert+0xbc/0x130 [pcmcia_core] [ 196.242081] [CBE27F80] [CD8EB164] pccardd+0x260/0x2b0 [pcmcia_core] [ 196.242389] [CBE27FC0] [C0046968] kthread+0xc0/0xfc [ 196.242647] [CBE27FF0] [C0014434] kernel_thread+0x44/0x60 [ 196.242912] Instruction dump: [ 196.243071] 4bfffd91 2c030000 41820104 813b00ec 3809ffff 7d634a14 7c00e838 7d430214 [ 196.243520] 7f8b5000 419e006c 7c0004ac 7c0300ae <0c000000> 4c00012c 3bdeffff 981f0000 lspci 00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes 00:0e.0 USB Controller: Agere Systems USB (rev 12) (prog-if 10 [OHCI]) Subsystem: Agere Systems USB Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 28 Region 0: Memory at 80882000 (32-bit, non-prefetchable) [size=4K] 00:0f.0 Multimedia controller: C-Cube Microsystems Cinemaster C 3.0 DVD Decoder (rev 02) Subsystem: C-Cube Microsystems Cinemaster C 3.0 DVD Decoder Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 32000ns max) Interrupt: pin A routed to IRQ 26 Region 0: I/O ports at 0c00 [size=256] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.0 Class ff00: Apple Computer Inc. Paddington Mac I/O Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 32 bytes Region 0: Memory at 80800000 (32-bit, non-prefetchable) [size=512K] 00:11.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro (rev dc) (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at 81000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at 1000 [size=256] Region 2: Memory at 80881000 (32-bit, non-prefetchable) [size=4K] Capabilities: [5c] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:13.0 CardBus bridge: Texas Instruments PCI1211 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at 80880000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=04, sec-latency=176 Memory window 0: 80000000-803ff000 (prefetchable) Memory window 1: 80400000-807ff000 I/O window 0: 00001400-000015ff I/O window 1: 00001800-000019ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 /proc/ioports 00000000-007fffff : /[EMAIL PROTECTED] 00000c00-00000cff : 0000:00:0f.0 00001000-000010ff : 0000:00:11.0 00001400-000015ff : PCI CardBus #01 00001800-000019ff : PCI CardBus #01 /proc/iomem 80000000-fcffffff : /[EMAIL PROTECTED] 80000000-803fffff : PCI CardBus #01 80400000-807fffff : PCI CardBus #01 80800000-8087ffff : 0000:00:10.0 80800000-8087ffff : 0.80800000:mac-io 80800010-8080002f : 0.00000010:interrup 80800034-80800034 : 0.00000034:media-ba 80800034-80800034 : media-bay 80808000-808080ff : 0.00010000:scsi 80808000-808080ff : mesh 80808100-808081ff : 0.00015000:fdc 80808200-808082ff : 0.00011000:ethernet 80808200-808082ff : bmac 80808300-808083ff : 0.00011000:ethernet 80808300-808083ff : bmac 80808800-808088ff : 0.00014000:davbus 80808800-808088ff : Sound Tx DMA 80808900-808089ff : 0.00014000:davbus 80808900-808089ff : Sound Rx DMA 80808b00-80808bff : 0.00020000:ata-3 80808b00-80808bff : ide-pmac (dma) 80808c00-80808cff : 0.00021000:ata-3 80808c00-80808cff : ide-pmac (dma) 80810000-80810fff : 0.00010000:scsi 80810000-80810fff : mesh 80811000-80811fff : 0.00011000:ethernet 80811000-80811fff : bmac 80813000-80813000 : 0.00013000:ch-b 80813000-80813000 : pmac_zilog 80813010-80813010 : 0.00013000:ch-b 80813010-80813010 : pmac_zilog 80813020-80813020 : 0.00013020:ch-a 80813020-80813020 : pmac_zilog 80813030-80813030 : 0.00013020:ch-a 80813030-80813030 : pmac_zilog 80813040-80813040 : 0.00013000:ch-b 80813040-80813040 : pmac_zilog 80813050-80813050 : 0.00013020:ch-a 80813050-80813050 : pmac_zilog 80814000-80814fff : 0.00014000:davbus 80814000-80814fff : Sound Control 80815000-80815fff : 0.00015000:fdc 80816000-80817fff : 0.00016000:via-pmu 80820000-80820fff : 0.00020000:ata-3 80820000-80820fff : ide-pmac (ports) 80821000-80821fff : 0.00021000:ata-3 80821000-80821fff : ide-pmac (ports) 80880000-80880fff : 0000:00:13.0 80880000-80880fff : yenta_socket 80881000-80881fff : 0000:00:11.0 80881000-80881fff : atyfb 80882000-80882fff : 0000:00:0e.0 80882000-80882fff : ohci_hcd 81000000-81ffffff : 0000:00:11.0 81000000-81ffffff : atyfb fd000000-fdffffff : /[EMAIL PROTECTED] fd000000-fd07ffff : cs memory probe fd080000-fd0fffff : cs memory probe fffffffffd000000-fffffffffdfffffe : reserved /proc/interrupts CPU0 16: 19 PMAC-PIC Edge PMac Output 17: 1 PMAC-PIC Edge PMac 18: 107321 PMAC-PIC Edge VIA-PMU 19: 0 PMAC-PIC Edge PMac Input 20: 10297 PMAC-PIC Edge ide0 22: 2 PMAC-PIC Level yenta 23: 14 PMAC-PIC Edge MESH 28: 2 PMAC-PIC Level ohci_hcd:usb1 31: 16703 PMAC-PIC Edge ide1 32: 927 PMAC-PIC Edge BMAC-txdma 33: 1108 PMAC-PIC Edge BMAC-rxdma 42: 2100 PMAC-PIC Edge BMAC-misc BAD: 0 /etc/pcmcia/config.opts # # Local PCMCIA Configuration File # #---------------------------------------------------------------------- # # System resources available for PCMCIA cards # # NOTE: these settings have no effect on resources assigned to a # CardBus bridge device itself; this file only affects resources # assigned to cards. Also, interrupt settings here will only affect # ISA bus interrupts assigned to 16-bit cards. PCI interrupts # generally can't be reconfigured. # # With the kernel PCMCIA subsystem, these settings also have no effect # at all on resources used for 32-bit CardBus cards. Those are set by # the PCI hotplug subsystem. # include port 0x100-0x4ff include port 0x1000-0x17ff include memory 0x80000000-0x80ffffff _______________________________________________ Linux PCMCIA reimplementation list http://lists.infradead.org/mailman/listinfo/linux-pcmcia
