Hi everyone, I have a PCI card which carries the Texas Instruments 1225 controller chip on it, and no matter which CardBus card I try on it (WiFi, USB2.0), I get the ugly "no high memory space" warning and the card is rendered useless in the system. On the other hand a PC-Card (16bit) WiFi works just dandy!
Here is the systems' information: CPU/MOTHERBOARD: -------------------------------------------------------------------------------------------- AMD Duron 1333Mhz Biostar AMD-760 M7MIA version 2.0 (latest BIOS) MIA1101F -- 11/01/2001-761-686B http://www.biostar-usa.com/mbdetails.asp?model=M7MIA Only used slots are the PCI PCMCIA card and the video card BIOS settings: USB ports: enabled USB kbd support: enabled audio/modem codec + SB support: enabled IDE: enabled IDE-RAID: disabled parallel port (EPP): enabled serial ports: enabled BIOS shadowing: disabled PNP: disabled ACPI: enabled and forced on or off via kernel command line makes no difference DISTRO: -------------------------------------------------------------------------------------------- Knoppix 5.0.1 2006-06-01 UNAME: -------------------------------------------------------------------------------------------- Linux Knoppix 2.6.17 #4 SMP PREEMPT Wed May 10 13:53:45 CEST 2006 i686 GNU/Linux /ETC/PCMCIA/CONFIG.OPTS -------------------------------------------------------------------------------------------- # # Local PCMCIA Configuration File # #---------------------------------------------------------------------- # System resources available for PCMCIA devices # Dell Notebooks freeze if something between 0x810-0x81f is included! include port 0x100-0x4ff, port 0x800-0x80f, port 0x820-0x8ff, port 0xc00-0xcff include memory 0xc0000-0xfffff include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff # High port numbers do not always work... # include port 0x1000-0x17ff # Extra port range for IBM Token Ring include port 0xa00-0xaff # Resources we should not use, even if they appear to be available # First built-in serial port exclude irq 4 # Second built-in serial port #exclude irq 3 # First built-in parallel port (if used by parport_pc) #exclude irq 7 # PS/2 mouse exclude irq 12 DMESG (both PCI card and CardBus card inserted before boot): -------------------------------------------------------------------------------------------- Linux version 2.6.17 ([EMAIL PROTECTED]) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #4 SMP PREEMPT Wed May 10 13:53:45 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 61424 pages, LIFO batch:15 DMI 2.2 present. ACPI: RSDP (v000 BIOSTA ) @ 0x000f5f40 ACPI: RSDT (v001 BIOSTA AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000 ACPI: FADT (v001 BIOSTA AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040 ACPI: DSDT (v001 BIOSTA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: BIOS age (2001) fails cutoff (2002), acpi=force is required to enable ACPI ACPI: Disabling ACPI support Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000) Built 1 zonelists Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux dma 2 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0120a000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Detected 1333.560 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 254740k/262080k available (2225k kernel code, 6720k reserved, 807k data, 324k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2671.64 BogoMIPS (lpj=5343296) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 Checking 'hlt' instruction... OK. Checking for popad bug... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed CPU0: AMD Duron(tm) processor stepping 01 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs migration_cost=0 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 729k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbed0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf00, dseg 0xf0000 PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI quirk: region 6000-607f claimed by vt82c686 HW-mon PCI quirk: region 5000-500f claimed by vt82c686 SMB Boot video device is 0000:01:05.0 PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: e0000000-e1ffffff PREFETCH window: d8000000-dfffffff PCI: Bus 2, cardbus bridge: 0000:00:09.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 20000000-21ffffff MEM window: 22000000-23ffffff PCI: Bus 6, cardbus bridge: 0000:00:09.1 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 24000000-25ffffff MEM window: 26000000-27ffffff PCI: Found IRQ 11 for device 0000:00:09.0 PCI: Sharing IRQ 11 with 0000:00:09.1 PCI: Sharing IRQ 11 with 0000:01:05.0 PCI: Found IRQ 11 for device 0000:00:09.1 PCI: Sharing IRQ 11 with 0000:00:09.0 PCI: Sharing IRQ 11 with 0000:01:05.0 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 98304 bytes) TCP bind hash table entries: 4096 (order: 3, 49152 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered audit: initializing netlink socket (disabled) audit(1194729079.448:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered PCI: Disabling Via external APIC routing vesafb: framebuffer at 0xd8000000, mapped to 0xd0880000, using 3072k, total 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=0 vesafb: protected mode interface info at c000:0eb9 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: QUANTUM FIREBALLlct10 10, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HITACHI DVD-ROM GD-7000, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 20044080 sectors (10262 MB) w/418KiB Cache, CHS=19885/16/63 hda: cache flushes not supported hda: hda1 hdc: ATAPI 40X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 5 Cannot allocate resource for EISA slot 6 EISA: Detected 0 cards. NET: Registered protocol family 1 NET: Registered protocol family 15 Using IPI No-Shortcut mode RAMDISK: Compressed image found at block 0 EXT2-fs warning: checktime reached, running e2fsck is recommended input: AT Translated Set 2 keyboard as /class/input/input0 VFS: Mounted root (ext2 filesystem). Failed initialization of WD-7000 SCSI card! usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 PCI: Found IRQ 11 for device 0000:00:07.2 PCI: Sharing IRQ 11 with 0000:00:07.3 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x0000c800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:07.3 PCI: Sharing IRQ 11 with 0000:00:07.2 uhci_hcd 0000:00:07.3: UHCI Host Controller uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:07.3: irq 11, io base 0x0000cc00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Initializing USB Mass Storage driver... usb 1-1: new low speed USB device using uhci_hcd and address 2 input: ImPS/2 Generic Wheel Mouse as /class/input/input1 usb 1-1: configuration #1 chosen from 1 choice usbcore: registered new driver usb-storage USB Mass Storage support registered. ieee1394: Initialized config rom entry `ip1394' ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! Unable to identify CD-ROM format. VFS: Can't find an ext2 filesystem on dev hda. FAT: invalid media value (0xb9) VFS: Can't find a valid FAT filesystem on dev hda. ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A cloop: Initializing cloop v2.04 cloop: loaded (max 8 devices) cloop: /cdrom/KNOPPIX/KNOPPIX: 31120 blocks, 65536 bytes/block, largest block is 65552 bytes. ISO 9660 Extensions: RRIP_1991A Registering unionfs 20060221-0341 Freeing unused kernel memory: 324k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) PCI: Found IRQ 11 for device 0000:00:09.0 PCI: Sharing IRQ 11 with 0000:00:09.1 PCI: Sharing IRQ 11 with 0000:01:05.0 Yenta: CardBus bridge found at 0000:00:09.0 [133f:2023] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:09.0, mfunc 0x0cc07d92, devctl 0x60 Yenta: ISA IRQ mask 0x0000, PCI irq 11 Socket status: 30000020 PCI: Found IRQ 11 for device 0000:00:09.1 PCI: Sharing IRQ 11 with 0000:00:09.0 PCI: Sharing IRQ 11 with 0000:01:05.0 Yenta: CardBus bridge found at 0000:00:09.1 [133f:2023] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:09.1, mfunc 0x0cc07d92, devctl 0x60 Yenta: ISA IRQ mask 0x0000, PCI irq 11 Socket status: 30000010 pccard: CardBus card inserted into slot 0 cs: pcmcia_socket1: time out after reset. pcmcia: Detected deprecated PCMCIA ioctl usage. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x2f8-0x2ff 0x330-0x337 0x378-0x37f 0x388-0x38f 0x3f8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x2f8-0x2ff 0x330-0x337 0x378-0x37f 0x388-0x38f 0x3f8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0xa00-0xaff: clean. usbcore: registered new driver hiddev input: Belkin Components USB-PS2 Adapter as /class/input/input2 input: USB HID v1.00 Keyboard [Belkin Components USB-PS2 Adapter ] on usb-0000:00:07.2-1 input: Belkin Components USB-PS2 Adapter as /class/input/input3 input: USB HID v1.00 Mouse [Belkin Components USB-PS2 Adapter ] on usb-0000:00:07.2-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver EDAC MC: Ver: 2.0.0 May 10 2006 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] parport_pc: VIA parallel port: io=0x378, irq=7 shpchp: HPC vendor_id 1022 device_id 700f ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ts: Compaq touchscreen protocol output EDAC MC0: Giving out device to "amd76x_edac" AMD761: PCI 0000:00:00.0 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0e: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A PCI: Found IRQ 10 for device 0000:00:07.5 PCI: Setting latency timer of device 0000:00:07.5 to 64 fuse init (API version 7.6) device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [EMAIL PROTECTED] cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff cs: warning: no high memory space available! cs: warning: no high memory space available! cs: warning: no high memory space available! cs: warning: no high memory space available! cs: warning: no high memory space available! cs: warning: no high memory space available! LSPCI -------------------------------------------------------------------------------------------- 0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller (rev 13) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e3008000 (32-bit, prefetchable) [size=4K] Region 2: I/O ports at c000 [disabled] [size=4] Capabilities: [a0] AGP version 2.0 Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP Bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: e0000000-e1ffffff Prefetchable memory behind bridge: d8000000-dfffffff BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at c400 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at c800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at cc00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9 Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) Subsystem: Sigmatel Inc Onboard Audio Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 10 Region 0: I/O ports at d000 [size=256] Region 1: I/O ports at d400 [size=4] Region 2: I/O ports at d800 [size=4] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:09.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: SCM Microsystems: Unknown device 2023 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 0x20 (128 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 20000000-21fff000 (prefetchable) Memory window 1: 22000000-23fff000 I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 0000:00:09.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: SCM Microsystems: Unknown device 2023 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 0x20 (128 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e3004000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 24000000-25fff000 (prefetchable) Memory window 1: 26000000-27fff000 I/O window 0: 00001800-000018ff I/O window 1: 00001c00-00001cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:01:05.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1) (prog-if 00 [VGA]) Subsystem: Palit Microsystems Inc.: Unknown device 0110 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M] Expansion ROM at e1000000 [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> LSPCMCIA -------------------------------------------------------------------------------------------- Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:09.0) Configuration: state: on ready: yes Voltage: 3.3V Vcc: 3.3V Vpp: 3.3V Available IRQs: none Available iomem: 0x00000100 - 0x000001ff 0x00000208 - 0x0000021f 0x00000230 - 0x000002f7 0x00000300 - 0x0000032f 0x00000338 - 0x00000377 0x00000380 - 0x00000387 0x00000390 - 0x000003af 0x000003bb - 0x000003d2 0x000003d4 - 0x000003f7 0x00000400 - 0x000004cf 0x000004d8 - 0x000004ff 0x00000800 - 0x0000080f 0x00000820 - 0x000008ff 0x00000a00 - 0x00000aff 0x00000c00 - 0x00000cf7 Available ioports: 0x000c0000 - 0x000fffff CardBus card -- see "lspci" for more information Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:00:09.1) Configuration: state: on ready: yes Available IRQs: none Available iomem: 0x00000100 - 0x000001ff 0x00000208 - 0x0000021f 0x00000230 - 0x000002f7 0x00000300 - 0x0000032f 0x00000338 - 0x00000377 0x00000380 - 0x00000387 0x00000390 - 0x000003af 0x000003bb - 0x000003d2 0x000003d4 - 0x000003f7 0x00000400 - 0x000004cf 0x000004d8 - 0x000004ff 0x00000800 - 0x0000080f 0x00000820 - 0x000008ff 0x00000a00 - 0x00000aff 0x00000c00 - 0x00000cf7 Available ioports: 0x000c0000 - 0x000fffff 0x60000000 - 0x60ffffff 0xa0000000 - 0xa0ffffff CARDCTL* -------------------------------------------------------------------------------------------- STATUS: Socket 0: 3.3V CardBus card function 0: [ready] Socket 1: no card CONFIG: Socket 0: Vcc 3.3V Vpp1 3.3V Vpp2 3.3V interface type is "cardbus" irq 11 [exclusive] [level] function 0: Socket 1: not configured IDENT: Socket 0: cs: warning: no high memory space available! no product info available cs: warning: no high memory space available! cs: warning: no high memory space available! Socket 1: no product info available INFO: cs: warning: no high memory space available! PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" cs: warning: no high memory space available! MANFID=0000,0000 cs: warning: no high memory space available! FUNCID=255 PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 /PROC/IO* -------------------------------------------------------------------------------------------- 00000000-0009fbff : System RAM 00000000-00000000 : Crash kernel 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cb7ff : Video ROM 000f0000-000fffff : System ROM 00100000-0ffeffff : System RAM 00100000-0032c7b8 : Kernel code 0032c7b9-003f6737 : Kernel data 0fff0000-0fff2fff : ACPI Non-volatile Storage 0fff3000-0fffffff : ACPI Tables 20000000-21ffffff : PCI CardBus #02 22000000-23ffffff : PCI CardBus #02 24000000-25ffffff : PCI CardBus #06 26000000-27ffffff : PCI CardBus #06 d0000000-d7ffffff : 0000:00:00.0 d8000000-dfffffff : PCI Bus #01 d8000000-dfffffff : 0000:01:05.0 d8000000-d9ffffff : vesafb e0000000-e1ffffff : PCI Bus #01 e0000000-e0ffffff : 0000:01:05.0 e1000000-e100ffff : 0000:01:05.0 e3000000-e3000fff : 0000:00:09.0 e3000000-e3000fff : yenta_socket e3004000-e3004fff : 0000:00:09.1 e3004000-e3004fff : yenta_socket e3008000-e3008fff : 0000:00:00.0 ffff0000-ffffffff : reserved 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial 0320-0323 : b_hpsb_iso_recv_flush 0350-0353 : b_hpsb_iso_recv_flush 0376-0376 : ide1 0378-037a : parport0 037b-037f : parport0 03c0-03df : vesafb 03f6-03f6 : ide0 03f8-03ff : serial 1000-10ff : PCI CardBus #02 1400-14ff : PCI CardBus #02 1800-18ff : PCI CardBus #06 1c00-1cff : PCI CardBus #06 5000-500f : 0000:00:07.4 5000-5007 : vt596_smbus 6000-607f : 0000:00:07.4 6000-607f : via686a c000-c003 : 0000:00:00.0 c400-c40f : 0000:00:07.1 c400-c407 : ide0 c408-c40f : ide1 c800-c81f : 0000:00:07.2 c800-c81f : uhci_hcd cc00-cc1f : 0000:00:07.3 cc00-cc1f : uhci_hcd d000-d0ff : 0000:00:07.5 d000-d0ff : VIA686A d400-d403 : 0000:00:07.5 d400-d403 : VIA686A d800-d803 : 0000:00:07.5 d800-d803 : VIA686A /PROC/INTERRUPTS -------------------------------------------------------------------------------------------- CPU0 0: 330780 XT-PIC timer 1: 8 XT-PIC i8042 2: 0 XT-PIC cascade 7: 0 XT-PIC parport0 8: 0 XT-PIC rtc 10: 0 XT-PIC VIA686A 11: 2585 XT-PIC uhci_hcd:usb1, uhci_hcd:usb2, yenta, yenta 12: 449 XT-PIC i8042 14: 193 XT-PIC ide0 15: 4336 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 DMESG WITH WORKING CARD -------------------------------------------------------------------------------------------- Linux version 2.6.17 ([EMAIL PROTECTED]) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #4 SMP PREEMPT Wed May 10 13:53:45 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 61424 pages, LIFO batch:15 DMI 2.2 present. ACPI: RSDP (v000 BIOSTA ) @ 0x000f5f40 ACPI: RSDT (v001 BIOSTA AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000 ACPI: FADT (v001 BIOSTA AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040 ACPI: DSDT (v001 BIOSTA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: BIOS age (2001) fails cutoff (2002), acpi=force is required to enable ACPI ACPI: Disabling ACPI support Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000) Built 1 zonelists Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux dma 2 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0120a000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Detected 1010.088 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 254740k/262080k available (2225k kernel code, 6720k reserved, 807k data, 324k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2023.64 BogoMIPS (lpj=4047283) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 Checking 'hlt' instruction... OK. Checking for popad bug... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed CPU0: AMD Duron(tm) processor stepping 01 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs migration_cost=0 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 729k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbed0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf00, dseg 0xf0000 PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI quirk: region 6000-607f claimed by vt82c686 HW-mon PCI quirk: region 5000-500f claimed by vt82c686 SMB Boot video device is 0000:01:05.0 PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: e0000000-e1ffffff PREFETCH window: d8000000-dfffffff PCI: Bus 2, cardbus bridge: 0000:00:09.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 20000000-21ffffff MEM window: 22000000-23ffffff PCI: Bus 6, cardbus bridge: 0000:00:09.1 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 24000000-25ffffff MEM window: 26000000-27ffffff PCI: Found IRQ 11 for device 0000:00:09.0 PCI: Sharing IRQ 11 with 0000:00:09.1 PCI: Sharing IRQ 11 with 0000:01:05.0 PCI: Found IRQ 11 for device 0000:00:09.1 PCI: Sharing IRQ 11 with 0000:00:09.0 PCI: Sharing IRQ 11 with 0000:01:05.0 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 98304 bytes) TCP bind hash table entries: 4096 (order: 3, 49152 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered audit: initializing netlink socket (disabled) audit(1194732288.472:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered PCI: Disabling Via external APIC routing vesafb: framebuffer at 0xd8000000, mapped to 0xd0880000, using 3072k, total 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=0 vesafb: protected mode interface info at c000:0eb9 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: QUANTUM FIREBALLlct10 10, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HITACHI DVD-ROM GD-7000, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 20044080 sectors (10262 MB) w/418KiB Cache, CHS=19885/16/63 hda: cache flushes not supported hda: hda1 hdc: ATAPI 40X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 5 Cannot allocate resource for EISA slot 6 EISA: Detected 0 cards. NET: Registered protocol family 1 NET: Registered protocol family 15 Using IPI No-Shortcut mode RAMDISK: Compressed image found at block 0 EXT2-fs warning: checktime reached, running e2fsck is recommended input: AT Translated Set 2 keyboard as /class/input/input0 VFS: Mounted root (ext2 filesystem). Failed initialization of WD-7000 SCSI card! usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 PCI: Found IRQ 11 for device 0000:00:07.2 PCI: Sharing IRQ 11 with 0000:00:07.3 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x0000c800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:07.3 PCI: Sharing IRQ 11 with 0000:00:07.2 uhci_hcd 0000:00:07.3: UHCI Host Controller uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:07.3: irq 11, io base 0x0000cc00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Initializing USB Mass Storage driver... usb 1-1: new low speed USB device using uhci_hcd and address 2 input: ImPS/2 Generic Wheel Mouse as /class/input/input1 usb 1-1: configuration #1 chosen from 1 choice usbcore: registered new driver usb-storage USB Mass Storage support registered. ieee1394: Initialized config rom entry `ip1394' ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! Unable to identify CD-ROM format. VFS: Can't find an ext2 filesystem on dev hda. FAT: invalid media value (0xb9) VFS: Can't find a valid FAT filesystem on dev hda. ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A cloop: Initializing cloop v2.04 cloop: loaded (max 8 devices) cloop: /cdrom/KNOPPIX/KNOPPIX: 31120 blocks, 65536 bytes/block, largest block is 65552 bytes. ISO 9660 Extensions: RRIP_1991A Registering unionfs 20060221-0341 Freeing unused kernel memory: 324k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) PCI: Found IRQ 11 for device 0000:00:09.0 PCI: Sharing IRQ 11 with 0000:00:09.1 PCI: Sharing IRQ 11 with 0000:01:05.0 Yenta: CardBus bridge found at 0000:00:09.0 [133f:2023] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:09.0, mfunc 0x0cc07d92, devctl 0x60 Yenta: ISA IRQ mask 0x0000, PCI irq 11 Socket status: 30000010 PCI: Found IRQ 11 for device 0000:00:09.1 PCI: Sharing IRQ 11 with 0000:00:09.0 PCI: Sharing IRQ 11 with 0000:01:05.0 Yenta: CardBus bridge found at 0000:00:09.1 [133f:2023] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:09.1, mfunc 0x0cc07d92, devctl 0x60 Yenta: ISA IRQ mask 0x0000, PCI irq 11 Socket status: 30000010 pccard: PCMCIA card inserted into slot 0 cs: pcmcia_socket1: time out after reset. pcmcia: Detected deprecated PCMCIA ioctl usage. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x2f8-0x2ff 0x330-0x337 0x378-0x37f 0x388-0x38f 0x3f8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x2f8-0x2ff 0x330-0x337 0x378-0x37f 0x388-0x38f 0x3f8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0xa00-0xaff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. orinoco 0.15rc3 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL PROTECTED]>, et al) orinoco_cs 0.15rc3 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL PROTECTED]>, et al) pcmcia: registering new device pcmcia0.0 eth0: Hardware identity 0001:0001:0004:0000 eth0: Station identity 001f:0001:0006:0010 eth0: Firmware determined as Lucent/Agere 6.16 eth0: Ad-hoc demo mode supported eth0: IEEE standard IBSS ad-hoc mode supported eth0: WEP supported, 104-bit key eth0: MAC address 00:60:1D:F2:9C:A6 eth0: Station name "HERMES I" eth0: ready eth0: index 0x01: , irq 11, io 0x0100-0x013f eth0: New link status: Connected (0001) NET: Registered protocol family 17 usbcore: registered new driver hiddev input: Belkin Components USB-PS2 Adapter as /class/input/input2 input: USB HID v1.00 Keyboard [Belkin Components USB-PS2 Adapter ] on usb-0000:00:07.2-1 input: Belkin Components USB-PS2 Adapter as /class/input/input3 input: USB HID v1.00 Mouse [Belkin Components USB-PS2 Adapter ] on usb-0000:00:07.2-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver EDAC MC: Ver: 2.0.0 May 10 2006 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] ts: Compaq touchscreen protocol output parport_pc: VIA parallel port: io=0x378, irq=7 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0e: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A EDAC MC0: Giving out device to "amd76x_edac" AMD761: PCI 0000:00:00.0 Linux agpgart interface v0.101 (c) Dave Jones shpchp: HPC vendor_id 1022 device_id 700f ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 PCI: Found IRQ 10 for device 0000:00:07.5 PCI: Setting latency timer of device 0000:00:07.5 to 64 fuse init (API version 7.6) device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [EMAIL PROTECTED] eth0: New link status: Connected (0001) eth0: New link status: AP Out of Range (0004) LSPCI WITH WORKING CARD -------------------------------------------------------------------------------------------- 0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller (rev 13) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e3008000 (32-bit, prefetchable) [size=4K] Region 2: I/O ports at c000 [disabled] [size=4] Capabilities: [a0] AGP version 2.0 Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP Bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: e0000000-e1ffffff Prefetchable memory behind bridge: d8000000-dfffffff BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at c400 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at c800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at cc00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9 Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) Subsystem: Sigmatel Inc Onboard Audio Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 10 Region 0: I/O ports at d000 [size=256] Region 1: I/O ports at d400 [size=4] Region 2: I/O ports at d800 [size=4] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:09.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: SCM Microsystems: Unknown device 2023 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 0x20 (128 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 20000000-21fff000 (prefetchable) Memory window 1: 22000000-23fff000 I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 0000:00:09.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: SCM Microsystems: Unknown device 2023 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 0x20 (128 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e3004000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 24000000-25fff000 (prefetchable) Memory window 1: 26000000-27fff000 I/O window 0: 00001800-000018ff I/O window 1: 00001c00-00001cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:01:05.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1) (prog-if 00 [VGA]) Subsystem: Palit Microsystems Inc.: Unknown device 0110 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M] Expansion ROM at e1000000 [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> LSPCMCIA WITH WORKING CARD -------------------------------------------------------------------------------------------- Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:09.0) Configuration: state: on ready: yes Voltage: 5.0V Vcc: 5.0V Vpp: 0.0V Available IRQs: none Available iomem: 0x00000100 - 0x000001ff 0x00000208 - 0x0000021f 0x00000230 - 0x000002f7 0x00000300 - 0x0000032f 0x00000338 - 0x00000377 0x00000380 - 0x00000387 0x00000390 - 0x000003af 0x000003bb - 0x000003d2 0x000003d4 - 0x000003f7 0x00000400 - 0x000004cf 0x000004d8 - 0x000004ff 0x00000800 - 0x0000080f 0x00000820 - 0x000008ff 0x00000a00 - 0x00000aff 0x00000c00 - 0x00000cf7 Available ioports: 0x000c0000 - 0x000fffff 0x60000000 - 0x60ffffff 0xa0000000 - 0xa0ffffff Socket 0 Device 0: [orinoco_cs] (bus ID: 0.0) Configuration: state: on Product Name: Lucent Technologies WaveLAN/IEEE Version 01.01 Identification: manf_id: 0x0156 card_id: 0x0002 function: 6 (network) prod_id(1): "Lucent Technologies" (0x23eb9949) prod_id(2): "WaveLAN/IEEE" (0xc562e72a) prod_id(3): "Version 01.01" (0xd27deb1a) prod_id(4): --- (---) Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:00:09.1) Configuration: state: on ready: yes Available IRQs: none Available iomem: 0x00000100 - 0x000001ff 0x00000208 - 0x0000021f 0x00000230 - 0x000002f7 0x00000300 - 0x0000032f 0x00000338 - 0x00000377 0x00000380 - 0x00000387 0x00000390 - 0x000003af 0x000003bb - 0x000003d2 0x000003d4 - 0x000003f7 0x00000400 - 0x000004cf 0x000004d8 - 0x000004ff 0x00000800 - 0x0000080f 0x00000820 - 0x000008ff 0x00000a00 - 0x00000aff 0x00000c00 - 0x00000cf7 Available ioports: 0x000c0000 - 0x000fffff 0x60000000 - 0x60ffffff 0xa0000000 - 0xa0ffffff CARDCTL* WITH WORKING CARD -------------------------------------------------------------------------------------------- STATUS: Socket 0: 5V 16-bit PC Card function 0: [ready] Socket 1: no card CONFIG: Socket 0: Vcc 0.2V Vpp1 99.2V Vpp2 109051904.0V interface type is irq 11 [exclusive] [level] function 0: config base 0x0001 option 0x00 io 0x0100-0x013f [16bit] Socket 1: not configured IDENT: Socket 0: product info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) Socket 1: no product info available INFO: PRODID_1="Lucent Technologies" PRODID_2="WaveLAN/IEEE" PRODID_3="Version 01.01" PRODID_4="" MANFID=0156,0002 FUNCID=6 PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 /PROC/IO* WITH WORKING CARD -------------------------------------------------------------------------------------------- 00000000-0009fbff : System RAM 00000000-00000000 : Crash kernel 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cb7ff : Video ROM 000f0000-000fffff : System ROM 00100000-0ffeffff : System RAM 00100000-0032c7b8 : Kernel code 0032c7b9-003f6737 : Kernel data 0fff0000-0fff2fff : ACPI Non-volatile Storage 0fff3000-0fffffff : ACPI Tables 20000000-21ffffff : PCI CardBus #02 22000000-23ffffff : PCI CardBus #02 24000000-25ffffff : PCI CardBus #06 26000000-27ffffff : PCI CardBus #06 a0000000-a0000fff : pcmcia_socket0 d0000000-d7ffffff : 0000:00:00.0 d8000000-dfffffff : PCI Bus #01 d8000000-dfffffff : 0000:01:05.0 d8000000-d9ffffff : vesafb e0000000-e1ffffff : PCI Bus #01 e0000000-e0ffffff : 0000:01:05.0 e1000000-e100ffff : 0000:01:05.0 e3000000-e3000fff : 0000:00:09.0 e3000000-e3000fff : yenta_socket e3004000-e3004fff : 0000:00:09.1 e3004000-e3004fff : yenta_socket e3008000-e3008fff : 0000:00:00.0 ffff0000-ffffffff : reserved 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0100-013f : pcmcia_socket0 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial 0320-0323 : b_hpsb_iso_recv_flush 0350-0353 : b_hpsb_iso_recv_flush 0376-0376 : ide1 0378-037a : parport0 037b-037f : parport0 03c0-03df : vesafb 03f2-03f5 : floppy 03f6-03f6 : ide0 03f7-03f7 : floppy DIR 03f8-03ff : serial 1000-10ff : PCI CardBus #02 1400-14ff : PCI CardBus #02 1800-18ff : PCI CardBus #06 1c00-1cff : PCI CardBus #06 5000-500f : 0000:00:07.4 5000-5007 : vt596_smbus 6000-607f : 0000:00:07.4 6000-607f : via686a c000-c003 : 0000:00:00.0 c400-c40f : 0000:00:07.1 c400-c407 : ide0 c408-c40f : ide1 c800-c81f : 0000:00:07.2 c800-c81f : uhci_hcd cc00-cc1f : 0000:00:07.3 cc00-cc1f : uhci_hcd d000-d0ff : 0000:00:07.5 d000-d0ff : VIA686A d400-d403 : 0000:00:07.5 d400-d403 : VIA686A d800-d803 : 0000:00:07.5 d800-d803 : VIA686A /PROC/INTERRUPTS WITH WORKING CARD -------------------------------------------------------------------------------------------- CPU0 0: 66160 XT-PIC timer 1: 8 XT-PIC i8042 2: 0 XT-PIC cascade 6: 57 XT-PIC floppy 7: 0 XT-PIC parport0 8: 0 XT-PIC rtc 10: 0 XT-PIC VIA686A 11: 1972 XT-PIC uhci_hcd:usb1, uhci_hcd:usb2, yenta, yenta, pcmcia0.0 12: 113 XT-PIC i8042 14: 193 XT-PIC ide0 15: 1170 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 I tried fiddling around with config.opts, but to no avail. I also realize that a newer kernel might fix the problem, but I'd like to exhaust any possibilities with this combination first. Any suggestions? And an off-topic question: is there a Linux supported USB (1.1 or 2.0) PC-Card (16bit) ?? I've searched for a while but couldn't find anything like that :( Thank you very much for any assistance! PS. Please CC me in your reply if you could. _______________________________________________ Linux PCMCIA reimplementation list http://lists.infradead.org/mailman/listinfo/linux-pcmcia
