Hello,I hope I am contacting the appropriate list for this. Please, let me know if I should search somewhere else.
There seems to be a problem accessing PCMCIA cards with O2 Micro OZ711MP1/MS1 Controller and it would be really great if I could get some hints from this list to get around it.
On a Fujitsu Siemens Celsius H240 a 2.6.22-3-amd64 kernel from Debian testing is in use. PCMCIA utilities for Linux 2.6 version 014-4 are installed. I concatenated the the output of lspci and lshal below.
When I insert a CardBus adapter, for instance a CNET CNF401 fast ethernet, everything works fine and the adapter becomes available to the system -- in this example the NIC with working LAN access. The lspci and lshal output then reflects the new hardware.
When I insert a PCMCIA adapter, for instance a 3com 3CCE589EC or an compact flash adapter, almost nothing happens: In the case of the 3com I just get (dmesg):
pccard: PCMCIA card inserted into slot 0
In the case of the compact flash adapter at the first insert dmesg gives:
pccard: PCMCIA card inserted into slot 0
cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
cs: memory probe 0x88000000-0x8fffffff: excluding 0x88000000-0x8fffffff
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0xf0300000-0xf03fffff: excluding 0xf0300000-0xf03fffff
Later dmesg issues just "pccard: PCMCIA card inserted into slot 0"
In both PCMCIA examples the lshal output doesn't change, in the lspci
output the original line:
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+
PostWrite+ ^^^^^^
changes to:
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+ ^^^^^^
In the case of the compact flash neither "modprobe ide_cs" nor "modprobe
pata_pcmcia" yield anything -- not even in dmesg.
As I do not want to access a SmartCard I did not try the o2scr driver from gna.org/projects/o2scr.
Now the command output will follow, but before that: Best regards, Alexander. ======================================================================== According to lspci -vv the card reader is: 8< ------------------------------------------------------------------ >808:03.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21)
Subsystem: Fujitsu Limited. Unknown device 131e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0303000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176
Memory window 0: 88000000-8bfff000 (prefetchable)
Memory window 1: 94000000-97fff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
08:03.1 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus
Controller (rev 21)
Subsystem: Fujitsu Limited. Unknown device 131e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0304000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=08, secondary=0d, subordinate=10, sec-latency=176
Memory window 0: 8c000000-8ffff000 (prefetchable)
Memory window 1: 98000000-9bfff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
8< ------------------------------------------------------------------ >8
According to lshal -vv we have:
8< ------------------------------------------------------------------ >8
udi = '/org/freedesktop/Hal/devices/pci_1217_7134_0'
info.bus = 'pci' (string)
info.linux.driver = 'yenta_cardbus' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'OZ711MP1/MS1 MemoryCardBus Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1217_7134_0' (string)
info.vendor = 'O2 Micro, Inc.' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1e.0/0000:08:03.1' (string)
pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 7 (0x7) (int)pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:08:03.1' (string)
pci.product = 'OZ711MP1/MS1 MemoryCardBus Controller' (string) pci.product_id = 28980 (0x7134) (int) pci.subsys_product_id = 4894 (0x131e) (int) pci.subsys_vendor = 'Fujitsu Limited.' (string) pci.subsys_vendor_id = 4303 (0x10cf) (int) pci.vendor = 'O2 Micro, Inc.' (string) pci.vendor_id = 4631 (0x1217) (int) udi = '/org/freedesktop/Hal/devices/pcmcia__1__1' info.bus = 'pcmcia' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1217_7134_0' (string) info.product = 'SmartCardBus Reader' (string) info.subsystem = 'pcmcia' (string) info.udi = '/org/freedesktop/Hal/devices/pcmcia__1__1' (string) info.vendor = 'O2Micro' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pcmcia' (string)linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:08:03.1/1.0' (string)
pcmcia.card_id = 1 (0x1) (int) pcmcia.manf_id = 65535 (0xffff) (int) pcmcia.prod_id1 = 'O2Micro' (string) pcmcia.prod_id2 = 'SmartCardBus Reader' (string) pcmcia.prod_id3 = 'V1.0' (string) pcmcia.product = 'O2Micro' (string) pcmcia.socket_number = 1 (0x1) (int) pcmcia.vendor = 'O2Micro' (string) udi = '/org/freedesktop/Hal/devices/pci_1217_7134' info.bus = 'pci' (string) info.linux.driver = 'yenta_cardbus' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.product = 'OZ711MP1/MS1 MemoryCardBus Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1217_7134' (string) info.vendor = 'O2 Micro, Inc.' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string)linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:08:03.0' (string)
pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 7 (0x7) (int)pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:08:03.0' (string)
pci.product = 'OZ711MP1/MS1 MemoryCardBus Controller' (string) pci.product_id = 28980 (0x7134) (int) pci.subsys_product_id = 4894 (0x131e) (int) pci.subsys_vendor = 'Fujitsu Limited.' (string) pci.subsys_vendor_id = 4303 (0x10cf) (int) pci.vendor = 'O2 Micro, Inc.' (string) pci.vendor_id = 4631 (0x1217) (int) 8< ------------------------------------------------------------------ >8
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ Linux PCMCIA reimplementation list http://lists.infradead.org/mailman/listinfo/linux-pcmcia
